Leaderboard

A bloody nice one!

Ok I misunderstood. My 2001 Rosso Mandello had a single plate clutch which they called RAM. This version had a aluminium flywheel that had some problems. I changed to 2 plate clutch to be om the safe side. I know that there is other type RAM clutches on the marked. The clutch hub boss on the 2005 gearbox is the 2 plate clutch version. If others are interested in my parts - let me know.

To build a double plate clutch - you need the following parts: 6 - M8x25 hex screws in hardness 10.9 (black) 6 - Special washers 1 - Flywheel 04067000 10 - Springs (5 - 04084100 and 5 - 13084100) 1 - Pressure plate 30082900 1 - Push rod plate 04082800 2 - Friction plates 1 - Intermediate steel plate 1 - Ring gear 01067930 8 - M6 screws with washers 1 - Clutch boss connected to the gearbox 0421160 (I happen to have almost all of these parts new, but since I live in Europe it will be some shipping cost. Let me know in a PM if you want to talk about buying my parts.) Rolf

The weather in the midwest has been horrible this year, I've ridden the G5 twice, the AeroLario twice, and the Mighty Scura once. There were tornadoes around last night, but it's sunny this morning, so the Scura rumbled to life for a look see. What a sweet bike. Everything just feels right. Light and nimble (for 500 lbs. of road huggin weight) bitchin sound, plenty of power.. I was in the zone. Oh, the damage? It's an old town, and most of the trees are down, no power, roads blocked. (for cars). Amazingly enough, no serious injuries.

docc, you had asked me about a needle tip for greasing the front u-joint recently. I recall posting a photo... but I've lost it ... and the tip, so I got another today. Not the same but it works! Thought I should post results, a good a place as any. The sharp point is tapered and is just the correct size to depress the tiny ball in the zerk. It doesn't have a straight approach, but good enough to get the job done. Keeping max downward pressure, only a tiny bit gets out around the tip. The rest gets through to fill the little bastard. O'Reilley's Auto Parts $15

Well what can I say,,,,, at least I did check all the wiring again, and it all checked out good , even the 4 connectors under fuse box,to my understanding . New Omron in 5th position and a big smile, pump going. Even Omrons die . Beer on me gentlemen. Would have been great seeing all the faces,,,, changing, Up against the wall, Some good advice and it works out. Cheers tom.

On a ride up to Beechmont in the gold coast hinterland Sent from my SM-G950F using Tapatalk

Thank you! Mike

I just sent a quote request.

Despite my post above, stay attentive of the weather. Some of the flooding is now entering Ark. A fellow rider rode western Ark last weekend and said it was fine but now we need to keep an eye on it.

I tried to ride it! Upon trying to start the damn thing apparently either the fuel pump or hose connecting the pump to filter failed--resulting in expensive ethanol free gas being pumped all over the bike and garage floor. So I've ordered a new fuel hose (hoping the pump is not cracked somehow), air filter, and fuel filter as tank-off maintenance items to take care of when I pull the tank later this week.

However she started life, she's undergone some changes. Many RC's get painted because of the bubbled decals. The brown chops and valve covers, with Ohlins, suggests a converted Cafe' Sport maybe. Still... a very nice machine Jwatch, and welcome to the forum!

Hello all, just become the owner of a '99 greenie xxxxxxxxx111270 Not had an easy life, & a little tatty in places, but nothing that can't be sorted!

Of course it is. You didn’t think I’d dare post one that wasn’t!

one i had built...

One thing I think we can state definitively is that Guzzi brake fluid is shaken, not stirred!