bigbikerrick

What I found restored the one on my 02 v 11 sport was to rub in a dollop of silicone dielectric grease, let it stay overnight then buff with a microfiber towel, made the dried out ,dull rubber look like new for the year I owned the bike, Rick.

Hello all, no one here made me an offer on all my miscellaneous bits I listed here a few days ago so off to "Flea-Bay' they went.....Auction starts at $25. check out item # 280263033790 Thanks, Rick.

Hello all , I was cleaning out the garage, and found a box full of parts from my 02 v 11 sport, to include, the fine threaded pins/ bushings that hold the swingarm to the pork chops, both axles with nuts, spacers, etc, front wheel bearings, and spacer tube, alloy clamps that hold the clip ons to the forks, right side exhaust hanger with passenger peg, all bolts that hold on footpegs,and bracket, shifter linkage and bracket special bolt/ bushing for rear brake pedal, a pair of Guzzitech head protectors, one perfect, one has some road rash( a one side replacement can be purchased from guzzitech) and some miscellaneous specialized bolts, etc. I have laid everything out on the floor and taken a photo of everything, if interested I can email you a photo. I would like to sell everything together as one unit. Make me a reasonable offer and its yours, you can never have too many " Guzzi spares" if you know what I mean....:-)) email bigbikerrick@hotmail.com for pictures..Ciao.

Hello Guys! I have some parts from my V 11 sport naked 2002 that someone here may need.... I have both upper clamps that hold the bars( clip-ons), both front and rear axles. complete with spacers and nuts, etc. right side passenger peg with mounting bracket/exhaust hanger, one drivers footpeg bracket, either left or right side, all the special bolts that hold the footpeg brackets/ rear brake pedal( not the pedal itself) front wheel bearings, and front axle spacer that goes between the bearings,some miscellaneous bolts, etc. make me an offer if you need anything specifically, or take everything for $100. and I will pay the shipping in the USA. Thanks Richard Duarte bigbikerrick@hotmail.com (If no one here needs this stuff, I guess I will ebay it next week)

Both front and rear axles from 2002 v 11 sport, also top clamps that hold the clip ons,. Just make me an offer! bigbikerrick@hotmail.com.

FOR SALE 2004 BALABIO LESS THAN 7k MILES PERFECT CONDITION BOTH COSMETICALLY AND MECHANICALLY, JUST HAD 6k MILE SERVICE COMPLETED, AND A SET OF BRAND NEW TIRES INSTALLED. GORGEOUS BIKE! FIRST REGISTERED IN FEB 06. ALWAYS GARAGED, AND PAMPERED NEVER ABUSED IN ANY WAY.ASKING $6900. email bigbikerrick@hotmail.com

I have one front brake disc, and the lower rear subframe that supports the transmission from my 2002 v 11 sport, its the one that has the additional brace going up to the engine case to stiffen the chassis and prevent transmission case breakage, you can use this to upgrade your older bike. Just make me an offer on these items, and they are yours! bigbikerrick@hotmail.com

I have the original sales brochure from my 01 rosso mandello for sale, it has some writing on the outside back cover, otherwise in nice shape, the color pictures are real pretty( of course) , also original handlebar grips, in perfect shape. best offer! bigbikerrick@hotmal.com

I have a pair of stock black exhaust cans, a front brake disc, and a rear lower transmission mount subframe for sale. from an 02 v11 sport. bigbikerrick@hotmail.com

From a 2003 v 11 Sport naked. Both front and rear axles with all spacers and nuts, both left and right clamps that holds the clip ons to the tops of the fork tubes, stock crossover, front axle bearings and spacer, left side short( high mount) exhaust hanger for MG Ti racing exhaust system, complete with passenger peg. will take any reasonable offer. email bigbikerrick@hotmail.com

I have a front brake disc, the stock crossover, and rear lower transmission mount subframe, and both front wheel bearings ,and spacer for sale. all from a 2003 v 11 sport naked with 7400 miles on it. Just make me an offer on the parts. email bigbikerrick@hotmail.com or call 520-364-4291

I have a size 54 top quality, thick, black cowhide leather jacket for sale. It is the "traditional" style leather motorcycle jacket like police officers wear. this is not a cheap imported jacket, but an extra thick ,but supple jacket with a zip out thinsulate liner, adjustable for width at each side, it has top quality YKK zippers throughout, and a multitude of zippered pockets, including a special pocket in front for a cell phone , made by "American Leather Wear" My wife purchased it for me at the local Honda dealer and paid around $325. for it. I have only worn it a couple of times ,so its like new, and its a very warm jacket, that will protect you in case of a spill, and last a lifetime. unfortunately, due to an accident, I am no longer riding. I can take some pictures of it and email them to anyone interested. I am asking $185. and I will pay for the insured shipping. email bigbikerrick@hotmail.com or call 520-364-4291 for info.

I have both front wheel bearings and the spacer tube from my 02 v 11 for sale, perfect condition, bearings are smooth rolling and intact, with only 7400 miles of use. Asking $45. email bigbikerrick@hotmail.com or call 520-364-4291 Thanks! Rick Duarte.

I am offering all the bolts, nuts washers, specialized fasteners etc from my dismantled V 11 sport naked for sale as a bulk package. some are very special such as the swingarm to porkchop pins and some are pretty large or long bolts, many different sized special hex head bolts,etc etc. Great selection to have on hand as replacements etc. will deffinitely come in handy in the garage at one time or another. I am offering all the fasteners I have in a bucket as a whole for $100. including shipping! ( they are pretty heavy) . I can lay them all out on a piece of cardboard on the floor and shoot a picture to show you everything you will be getting. If interested email bigbikerrick@hotmail.com for a photo and any additional information, and my phone number if desired. First come Gets them!!

I have left from my 2002 V 11 sport with 7400 miles on it: 1 front brake disc, bitubo steering damper with mount, threaded pins for pork chops/ swingarm mounting, complete swingarm, stock crossover, 6 speed transmission, complete with clutch slave cylinder,and pushrod, complete rear drive assembly, both axles, both triple clamps, lower rear sub frame( tranny mount), new style with added side bracing to engine block,left side ti exhaust can with hanger and passenger peg,many miscellaneous bolts, nuts washers, etc.. that you have left when you dissasemble a complete v 11 sport. I will accept REASONABLE offers on any and all parts, feel free to email bigbikerrick@hotmail.com or call Rick Duarte at 520-364-4291 with any specific questions about parts. I can also email pictures if you desire.

Ive got one of the beautiful little aluminum engraved moto guzzi flying eagles from my v 11 sport , it is on a rectangular alloy piece about 2" long and found on the upper triple clamp, and possibly on other places of the v 11 sport. it attaches with double stick 3m tape, and is in perfect shape. will take the best offer for it. Im sure someone here is missing one on their bike, or wants to add one somewhere...... bigbikerrick@hotmail.com

The wife says" Get rid of all that junk cluttering up the garage floor" whats left of my V 11 sport... 2002 ,7400 miles. complete transmission, drive shaft with both cardan joints, stock crossover, upper and lower triple clamps, left side Ti exhaust can and hanger/mount, regulator rectifier, I think...( finned electronic bugger near the oil cooler, has DUCATI brand , 12V stamped on it), both front disc brakes and brembo calipers, rear caliper and mounting bracket, both pork chops with hardware, rear transmission mount sub frame with the extra support Guzzi added in 02,both axles with nuts, etc, one polished Guzzi tech head guard with mounting bolts ( the other one saved my head from ANY damage, amayzing piece of engineering) guzzi tech will sell the other one separate, to complete the pair. swing arm assembly. you can call or email me for specific details about parts/ condition/ or pictures if you desire. email bigbikerrick@hotmail.com (520) 364-4291 Richard Duarte.

I have the following parts left from the dismantling of my 2003 ( really 2002) V 11 Sport, with 7400 miles, for sale: both front brake discs, both front calipers, rear caliper, rear sub frame( the part that goes onto the engine, the newer style with the added brace) one left side MG Ti can, rear footpeg hangers, complete 6 speed transmission, upper and lower triple trees, complete rear drive, both front and rear axles, swing arm, new stock grips, repair manual/ owners manual on CD, upper clamps for clip ons, front engine sub frame /support, both horns. best reasonable offer on any and all parts, I need to clean out my garage! email bigbikerrick@hotmail.com call (520) 364-4291 for details, etc....

My crashed V 11 sport naked with 7500 miles is dismantled, and I have the following parts for sale: complete rear drive assembly, driveshaft with both cardan joints, complete 6 speed transmission, ( always shifted perfectly and had no leaks) hydraulic clutch slave cylinder assembly with pushrod, rear tail subframe, front engine support subframe, both pork chops, both upper and lower triple clamps( perfect for someone who wants to drill it for more upright bar mounts, but wants to keep their stock one cherry), both front and the rear brake discs( the better newer style with the oval holes) both front brembo brake calipers, with excellent brake pads, and rear brembo caliper with good pads, headlight bucket assembly with intact glass lens, alloy mounts for headlight bucket assembly, rear swingarm, rear rim ( the wide one)with cush drive assembly. both alloy exhaust can hangers, left side moto guzzi titanium "ti" exhaust can, stock crossover,The "pins" that locate the swingarm onto the pork chops. many miscellaneous bolts, etc from the dissasembly of the entire bike. Make me a REASONABLE offer for any parts you may need, feel free to email me at bigbikerrick@hotmail.com for specific details as to the condition of the parts,etc. and my home phone number if you wish to speak with me on the phone. Thanks! also I have the complete kickstand assembly from my V 11 including the mount, spring, and little switch. all in fine shape. email bigbikerrick@hotmail.com

I have a pair of the stock exhaust can hanger/passenger footpeg mount brackets, and a pair of stock rubber handgrips for a 2003 v 11 sport items as new ,taken off bike when being prepped by the dealer and replacements installed. $40. for the hangers, and $20. for the grips . email bigbikerrick@hotmail.com

I have a dowco"protector" motorcycle cover in excellent condition, this is the heavy duty , waterproof canvas type material, not one of the cheap lightweight nylon covers. It fits the v 11 sport and le mans perfectly , and can be locked with a cable. It has the special coating on the lower section, so hot pipes wont harm it,, and soft felt on the inside so it wont scratch the windshield. It can be used to protect the bike if parked outside, but I only used it a couple of times in the garage. I paid around $80. for it , asking $45. I also have the factory tool kit from my 2002 v 11 sport, Its missing the nylon bag, the tools come in, and the plastic screwdriver handle, otherwise Im pretty sure its complete, some rust specks on the tools, but otherwise in decent / useable shape. asking $40. email bigbikerrick@hotmail.com

Can any of you folks tell me what the price of a new shift lever for a v11 sport is? Thanks, Rick.

Yes, I have the shift lever available email bigbikerrick@hotmail.com

I have 4 of the stock amber turn signal lenses and the pair of alloy hanger brackets that hold the exhaust cans from my 2003 V 11 sport naked. For sale, just make me a reasonable offer and they are yours! Thanks bigbikerrick@hotmail.com

Hey Carl, Did you call me at home and leave a message for me? regarding the engine on my guzzi? please email me at bigbikerrick@hotmail.com Thanks Rick Duarte