Jump to content

nobleswood

Members
  • Posts

    555
  • Joined

  • Last visited

  • Days Won

    14

Everything posted by nobleswood

  1. I might have to go out to the shed & open my forks to look just to satisfy my curiousity......looked in the manual instead & confirmed these are damping rod forks. Stewgnu, don't know if I missed your thread on putting the cartridges in? Did you measure the sag to determine if the spring rate was correct for you ? How much do you weigh ? What spring rate do you currently have ? £400 seems like a great deal. I paid about that much to rebuild the Showa forks on my Griso with new valves, shim stack, wipers & seals. Did you have a look at what the shim stack was on your new cartridges before intalling them ?
  2. I'm abit confused here; I thought all the V11, non Ohlins, bikes had damper rods forks. Admittedly I haven't pulled the forks apart & my opinion is based on the fact that there is no compression adjustment on the lower fork bracket.
  3. I am always impressed with how fluent Noraly from Icthy Boots is, even on complex topics. Whenever I watch the Isle of Man, I can never understand anything when they interview those guys. Half time I can't even understand the announcers. They should use subtitles. Have you watched the film on the Dunlop bike racing family ? They are barely understandable Classic stuff !
  4. Accents are funny things. I grew up in a rural area in Lincolnshire, only about 40 miles from Stewgnu's place really but I never visited. From the town of Newark where I went to school, to Lincoln was about 17 miles and had it's own accent. My parents were from Nottingham, 40 miles away, & I could hear the subtle change of accent & local slang. Sheffield & Yorkshire was only 40 miles but a huge leap in how different the language sounds. If you watch the BBC the programs are rich with accents from different parts of what is a small country
  5. Stewgnu, The schools are closed here in Ohio so we're at home alot & watching funny movies; watched 'The Full Monty' last night, set in Sheffield. Had the subtitles on but the kids still had to have 'Yorkshire' translated for them
  6. I'm going to digress slightly here; I'm searching for seals & dust caps for my Griso & rather than use OEM wanted to try SKF seals, which I've heard good things about. But I haven't found a source yet. Any pointers ?
  7. Docc, How are you & yours doing ? Heard you had a bit of wind down there ! Tim
  8. I was fairly certain that I was sent an invite by mistake, but they allowed me to hold the flashlight for Nick, do the dishes & load firewood. No body raised the issue so I stayed . For riding bikes it's a great part of the world, I was envious. Bill was & if Kathy allows, is, a generous host.
  9. Thanks I’ll be cautious getting the seal in, too many examples of timing cases with pieces broken off recently
  10. Novice question; replacing the seal. Is it a dry fit ? Fixed with gasket sealer ? Lightly oiled & fitted ? Hammer for moderators approval
  11. My fairing had some buzzing when I first installed it. I added some foam door sealer around the headlight where the fairing & trim ring touch. Then 2mm neoprene pads between the supports, brackets & the fairing. That cured it for me
  12. Looking at my torque chart that specs a general torque for an M8 x 1.25 bolt is 20 Lbs. That’s what I used. Yes. I was lucky
  13. It has the raised numbers 8.8 on the top
  14. Got lucky tonight; changing out the camchain tensioner ( yes I'm still tinkering with that ) as I torqued down the bolts the new, from the hardware store bolt 'gave' more than the other bolts & didn't make the wrench 'click' as quickly as the oem bolts. Could have been a disaster.
  15. Anybody have a source for the Valpollini gaskets? AF1 & MG Cycle have the regular & a thicker gasket, GU 1402360B, listed on their websires, but no reference to the Valpollini gasket.
  16. Last year was the first time I made it there. Expect it to be busy with a line. Recommendations 🤔 Cadre Cycle is a great place to visit, & come to think of it, probably a good place to ask about Breweries 👍
  17. The Garage Brewed Bike Show is on February 8th. https://garagebrewed.com/ Only a couple of hours from Indianapolis....
  18. Stewgnu, great pictures ! Thanks. My brother & family live on the West side of the Peak District in Cheshire. We had hoped to visit him this summer & hike the hills around Mellor but it didn't happen Your pictures wowed my family; next time we'll get there. How are you liking the new front end ?
  19. Stewgnu Riding in the Peak District
  20. My see if there is anyone near you who can set up your suspension. I have been trying to figure this out for years & finding 'Jake' just up the road from me has been an enjoyable education. He doesn't charge much & has an experianced eye, so that when he pushes down on the forks or the shock he can tell what needs to be done. If you don't have much luck with finding a guru, you can always look up Dave Moss Tuning on Youtube & watch his videos over winter As several have posted here, setting up the sag on the bike is an important first step that can tell you alot about what's to be done. Good luck. Keep asking questions.
  21. One time when I was grumbling to Curtis Harper about my valve covers leaking first the left & then the right one the SSR, he mentioned flattening them on some plate glass with sandpaper. They are only aluminum after all & tightening them down incorrectly can twist them out of shape. Mine were twisted enough to need attention. It may not make a difference but it doesn't hurt either.
  22. So. Scud. Tell us about this 'MV Agusta F4' that's visiting ?
  23. Looking at the Traxxion webpage, I see what you mean now; how the preload & rebound adjusters fit inside the extended cap. Good to know about the incompatibility of the caps, although I am surprised that the same manufacturer, be it Showa or Kayaba wouldn't standardize their stuff.
×
×
  • Create New...