Jump to content

Recommended Posts

Gots em.  :grin: Docc noticed a hammer in one of the first pictures I posted and said I must be a Guzzi mechanic. I was thinking about making a pile of them and taking a picture, but then I'd have to sort them back out.. so..  a few pix.

In the Guzzi Garage ™

My favorite, and I'd recommend them to anyone doing mechanical work is the one on the left, a copper hammer. You can use it with impunity on steel parts without damaging them, or hit a hardened punch without sending a piece of it straight for your eyeball. A small ball peen in case somthing needs peened, a couple of plastic hammers, leather hammer, and a couple with no use on machines.

30062959193_8eefe15f1a_c.jpg2016-10-31_05-11-10 by Charles Stottlemyer, on Flickr

The shop roll around: 

30579944522_5df0a2df88_c.jpg2016-10-31_05-11-38 by Charles Stottlemyer, on Flickr

The hanger roll around. These are home made nylon hammers of different radii used with a shot bag (not pictured, it's not a hammer) :huh2:  to form sheet metal.

30062987323_3c19815417_c.jpg2016-10-31_05-12-24 by Charles Stottlemyer, on Flickr

Also in the hanger roll around, the ubiquitous copper hammer (everybody needs one)

30696977285_b68dfe7597_c.jpg2016-10-31_05-13-46 by Charles Stottlemyer, on Flickr 

I suppose this qualifies.. a planishing hammer, also for forming sheet metal.

30062994473_b0db2fb7c9_c.jpg2016-10-31_05-12-38 by Charles Stottlemyer, on Flickr

A couple of body hammers, homemade English panel beater's hammer for shrinking bumps, and a shrinking file, which is used as a hammer for shrinking.

30608851501_566d914a29_c.jpg2016-10-31_05-12-58 by Charles Stottlemyer, on Flickr

Two different rivet hammers for..uhhh.. driving rivets. :)

30065063934_21fb3b2e87_c.jpg2016-10-31_05-13-23 by Charles Stottlemyer, on Flickr

 

I've said many times that having the proper tool is generally the biggest part of the job. 

Hammers? Yeah.  :thumbsup:  :mg:

Edit: Oh, forgot the machinist's hammer and jeweler's hammer in my Gerstener box. Sorry, didn't take a picture of them, Docc.

  • Like 4

Share this post


Link to post

A humbling collection! :notworthy:

Share this post


Link to post

Master Chuck Hammer

Share this post


Link to post

I'd be tempted to toss that dead blow in the second photo if it is getting on in age. Looks just like mine before the head of it disintegrated into little bits. I bought it from the Snap-On guy back in the dark ages though.

Share this post


Link to post
If you bought a DeadBlow from SnapOn it has a lifetime warranty . The hammer in the pic is not a DeadBlow. The heads on this hammer can be replaced.

Share this post


Link to post

Happy, happy, happy . . . :mg::luigi::sun:

IMG_0096.JPG_1.jpeg

  • Like 1

Share this post


Link to post

I have that "brass" hammer, second form the right, above, but have never considered a pure copper hammer . . .

 

I have long wanted one of these "Non-sparking Aluminum-Bronze" jobs:

non-sparking-aluminum-bronze-sledge-hamm

Share this post


Link to post

If you bought a DeadBlow from SnapOn it has a lifetime warranty . The hammer in the pic is not a DeadBlow. The heads on this hammer can be replaced.

Not the one with the red handle, but the black one on the far left of the second photo. Good point, but honestly it never entered my mind to inquire about warranty. It's been a long time since I've dealt with Snap-On, but found that they were tougher to deal with on warranty than they used to be. I was surprised at how the deadblow broke up. Lots of sharp chunks flying around. Good reason to listen to the little voice in my head that says you should really be wearing safety glasses when you do this..... but honestly wouldn't normally put them on when using a deadblow.

Share this post


Link to post

Gotcha.. it is a Compothane (mallet) hammer . I think it still has a lifetime warranty. These hammers of this material will get brittle and shatter w / age . Find a good SnapOn dealer and he should warranty it for you .

Share this post


Link to post

Found a [cheap!] copper hammer, and a friend who has offered to fit a black cherry handle. Those two things seem paired like Brie and baguettes. Beer and burgers. Wind and winding-it-out! :race:

.5cw.jpg

http://www.hammersource.com/Copper-Hammers-Wood-Handle/1/2lb-Copper-hammer-3/4-face-11-wood-handle/

Share this post


Link to post

Chuck,

 

I have to ask;

 

'A couple of body hammers, homemade English panel beater's hammer for shrinking bumps, and a shrinking file, which is used as a hammer for shrinking.'

 

How do you use them ?

Share this post


Link to post

Nice to see the Snap-On duck billed pliers, the black red handled ones are OK but I still miss my old octopus grip pair a co-worker 'borrowed'..........Oh, wrong thread.

Share this post


Link to post

Chuck,

 

I have to ask;

 

'A couple of body hammers, homemade English panel beater's hammer for shrinking bumps, and a shrinking file, which is used as a hammer for shrinking.'

 

How do you use them ?

Like any other hammer. The "file" makes indentations in the bump and shrinks it. The thick leather on the panel beater's hammer does the same thing, but it's more delicate. I don't know why it works.  :huh2:

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...