Jump to content

Recommended Posts

View days ago I had problems with shifting to third and fourth gear. I took the pre selector cover off the gearbox and found the eccentric pin on the bottom of the gearbox. How did it come off? I put it back in the hole. Its really tight, you have to use a hamer. I am sure that it doesn't come off anymore. 

Does anybody have experience with this? Probably it was not fitted deep enough in the hole. Today I will put it al together and see whats happening..........

 

Share this post


Link to post
Share on other sites
11 minutes ago, Bastiaan Sponton said:

View days ago I had problems with shifting to third and fourth gear. I took the pre selector cover off the gearbox and found the eccentric pin on the bottom of the gearbox. How did it come off? I put it back in the hole. Its really tight, you have to use a hamer. I am sure that it doesn't come off anymore. 

Does anybody have experience with this? Probably it was not fitted deep enough in the hole. Today I will put it al together and see whats happening..........

 

Which eccentric pin do you mean? Some gearboxes have 1 and some have 2 but in both cases they are retained by a nut on the outside of the selector cover.

Ciao

Share this post


Link to post
Share on other sites
23 minutes ago, Bastiaan Sponton said:

b504a287a45f59e80dd4292c10b009df.jpg


Verzonden vanaf mijn iPhone met Tapatalk

Ok thats a "roll" pin and is used to control over travel of the selector arm. On later transmissions its replaced by and adjustable eccentric pin. It's just a press fit in the cover. Why it came out I dont know, thats not a common event. I suggest you use some green Loctite on it if it comes out again.

Have a look at my write up on the selector mechanism.

Ciao  

  • Thanks 1

Share this post


Link to post
Share on other sites

Thanks for your answer Phil. I was thinking of that loctite but its so tight fit, I just put it back. Nothing more to say about it. Now its time for RUGBY!!!!!!!

Share this post


Link to post
Share on other sites
31 minutes ago, Bastiaan Sponton said:

Thanks for your answer Phil. I was thinking of that loctite but its so tight fit, I just put it back. Nothing more to say about it. Now its time for RUGBY!!!!!!!

RUGBY:( not for us. Australian MotoGP :)

Ciao

 

  • Like 1

Share this post


Link to post
Share on other sites

Ha New Zealand is out. Who taught about that.

Went for a drive after putting everything back. Works fine again!!

Philip Island, I past it on my bicycle long time ago. Back then i never realized that there was a circuit on that island :wacko:.

Ciao ciao

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...