Jump to content
bridge

Rear brake actuating rod -- Master cylinder

Recommended Posts

Apologies for a newbie question -- I removed the rear brake pedal and the brake actuating rod came free of the master cylinder. Please tell me what's involved in reinserting it. Do I need new seals? Rebuild kit?  

Brian 

Share this post


Link to post
Share on other sites

Clean and lube the end of the rod and maybe Armorall the boot. Slip it back in and you are good to go. When adjusting the pedal, make certain that there is just the tiniest bit of slack in the system (pedal-rod-master cylinder cup). If there is no slack, you might be partially activating the rear brake. If you have a stand, you can check the free wheeling of the rear wheel once all is back in place.

  • Like 4
  • Thanks 2

Share this post


Link to post
Share on other sites

Thank you, po18guy. It worked. At least I have the bike back to the way it was before I started fiddling with the pegs. 

Brian 

Share this post


Link to post
Share on other sites

You are very welcome. Had to do exactly this when I swapped the footpegs out on my V11. There have been reports of heavy rear brake drag after removing and re-installing that rod and the lever. Just a bit of wiggle room in the rod and you will be golden. Still, after a ride, you might check the rear wheel for free rotation (well, as much as that term applies) as well as the disc for temperature. If you are a regular user of the rear brake, understand that it will be warm. If it is too hot to touch, recheck the linkage for some free play, and consider that the caliper pistons could also he dragging. If so, a caliper rebuild is the solution to that - but one thing at a time.

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...