Jump to content

odometer stopped


red lion

Recommended Posts

Check if the Speedo cable is actually turning at the Speedo end first! Disconnect it from the back of the Speedo.

If you spin and push it into the cable housing you should feel it "lock" ok into the gearbox end. If it's just flapping about it could be broken.

If you've got a stand just start the bike and put it in gear. See if the cable spins at the Speedo end.

 

If it's the black ITI one, you can service them.... Just about. With replacement worm gears.

Link to comment
Share on other sites

On 9/26/2021 at 8:18 PM, red lion said:

My odometer stopped working on the 1100 sport. How hard is it to remove the speedo?

If you talking about unsealing the bezel from the gauge, it is not very difficult. You need to pry it out with a very thin blade. Don't use the only screwdriver you could find. Use something thin with a large blade to minimize the damage you could cause to the plastic rim of the bezel.

When sealing it back, use some very light glue, so you may be able to open it again if you need to.

Link to comment
Share on other sites

The trip meter and speedo are still working so the cable should be OK. I would think the gears must be worn on the odometer. It looks like the front fairing needs to come off to remove the speedometer.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...