Jump to content

'01 V11S Right side parts needed


Guest jlburgess

Recommended Posts

Guest jlburgess

Argh, dang gravel. :homer:

Took me out at about 45 mph, and was lucky enough to walk away. I'm in the market for some parts now - does anyone want to sell? If so please call in US (541) 821-6262.

 

Need:

RH mirror

RF turn signal

clutch and brake levers

R spark plug wire

R cylinder head guard

R valve cover/silver

R Mistral aluminum muffler

Aluminum adjustable footpegs (factory accessory)

 

Thanks,

John Burgess

Eagle Point, Oregon

Link to comment
Share on other sites

Also glad to hear you're ok.

Some parts will probably be cheaper new from other sources, than used MG parts (guessing).

turn signals - source from Buell

clutch/brake lever- Ducati (or a really nice expensive one from CRG)

pegs- again- buell ones can be made to fit

 

Good luck getting it back together.

Jason

Link to comment
Share on other sites

The list prices for new Guzzi brake and clutch levers are appallingly expensive.

 

Luckily I have yet to need replacements but I bought a couple of pattern levers as spares from Agostinis in Italy.

 

These are identical to the Brembo originals except have silver coloured adjusters rather than gold but if this bothers you just reuse the old adjusters.

 

They worked out at around £20 each (sterling)

 

Contact details for Agostinis: http://www.agostiniduilio.com/negozioflash-ingl.html

 

Reboot spares in the UK are breaking a Rosso Mandello and V11 Le Mans. Not sure what bits they have left but it may be worth dropping them an email.

 

Reboot website http://www.rebootguzzispares.com/index.htm?mainframe.htm&2

 

Hope you get it fixed soon!

 

Guy :helmet:

Link to comment
Share on other sites

  • 3 weeks later...
Guest jlburgess

Thanks for the good tips fellas. Turns out anyone needing brake and clutch levers can get them for $13.95 from Parts Unlimited. If you only have broken the end off, a late model Ducati lever will mount right up by removing the pin and E-clip, but new levers are silver. 4 position adjusters are still present.

 

Still in desperate need of a right side Mistral aluminum can if anyone has one (or a set cheap maybe?)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...