I’m doing some work on a mates cafe sport and he fitted a new tps when one of the screws broke off in the tb when he was removing it, I’ve managed to get the broken piece out with some loss of the aluminium around it but it’s okay for now
Yes seen that thanks but it’s in Germany and works out quite expensive with VAT and shipping but it’s an option
the high idle cable always goes to the right TB as far as I know
I wouldn’t want to pay £14k for it then start chopping it about, I actually think everything else is perfect, the Norton seat is fine but needs to be level with the tank
https://www.ebay.co.uk/itm/176319693117?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Riq-QL5JT-u&sssrc=4429486&ssuid=z2laZvJuS16&var=&widget_ver=artemis&media=MORE
is it me or is the seat unit and rear subframe just wrong?
I’ve just replaced 2 throttle position sensors on my bike and a friend’s, they both had a misfire at 2k rpm when riding slowly, open the throttle and you could pull through it
The travel of the selector arm in both directions is adjusted with the eccentric adjuster, I’ve seen cases where the arm travel hits the inside of the casing which causes false neutrals,
Hi Craig the problem is the stock headlight is assembled differently to most others, I went with a complete led unit and it gives a good light, is yours broken?
I did all the carbon fibre upgrades on it then sold it??
cf side panels, front fender, belly pan and high level Mistrals , you just can’t find these bits anymore