Installing SpeedHut gauges
The Speedhut gauges are a good replacement for the troublesome Veglias, about $300 for a pair
A word of caution, they make many different types, you need 3-3/8" and be sure to let them know it's for a bike and they will add silicone to the glass. The reset button is normally through the glass but they have an option of adding a jack at the rear as you can see below. This jack is used to configure the tach for no of cylinders, calibrate the speedo and trip reset.
Avoid Canbus type, that's a
The Speedhut speedo install is proceeding slowly. Leveraged Scud's lamp fixture idea, but I wanted to distribute the loading across a larger area of the speedo's case so Macgyvered this:
Gorilla glued the step-up washers and lamp nut together as an assy then JB welded it to the back of the case. Finally, loctited the center post in place. While the "center" post is off center, the assy (including the gauge) was installed in the OEM gauge cup for the JB weld and now slips easily slip in
