While I'm fooling with doing technical electrical work on the Mighty Scura, I thought I'd address this issue. It's 17 years old, now..
From looking at the schematic, it looks like I could just run a wire from Fuse F3 to the 30 post on the start relay and save yet another connection to the battery post. Is this a logical thing to do?
TIA
Mine is an 03 . This is the EASIEST thing you will ever do . Call me . this will take 2 minutes .
# 1 come up with a conventional ( regular size ) relay ,mounting bracket & connector.
# 2 make sure there is NOT a diode in the relay .
# 3 connect # 30 through a fuse to 12v , 85 to ground .
# 4 disconnect the solenoid wire and install a wire with a male terminal to the existing solenoid wire , then to 86 .*
# 5 go from 87 to the starter solenoid and attach using