Niels Knudsen
-
Posts
37 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Gallery
Community Map
Posts posted by Niels Knudsen
-
-
-
-
-
Owing a MG V10 Centauro, Ive made a TPS-harness myself, I used Superseal 3 pin male and Female, see link:
https://www.dkvolt.dk/produkt/superseal-stik-3-pin-er-et-vandtaet-stik-til-samling-af-ledninger/
Which fitted the OEM connectors 100 %.
Greetings from DK
Niels Knudsen.
- 3
-
Hello Lukcy Phil.
I used nailpolish, because my wife always have a heck of trouble removing it. So I thought it will be durable. And it was easy to applicate with the built-in brush, and furthermore cheap, because I stole it from "She Who Must Be Obeyed."
Greetings from Dk.
Niels.
- 1
-
Hi all.Last week both my speedometer and tacho stopped working. Speedo at Zero and tacho steady at 7000 rpm working upwards. Pointers very fainted. Decided to repair. Removed bezel as otherwise described, painted pointers with red nailpolish. Found loose counterweight in tachohousing (clic-clac). Repositioned counterweigt and glued it. Put meters back together. Speedocable was broken, replaced. Now a happy man......Photos at this link:
Greetings from Niels Knudsen, DK
- 4
-
First go to:
Fill in your values from handbook, EX: Intake:open 22°30' before TDC - type 22.30!!Follow page instructions, I choosed CD-size, and print PDF.Cut out print and glued to a CD.Wheel is hold at alternator by magnet, pointer made of coloured paperclip, bent and hold by magnet.Photos here:
Greetings from DKNiels Knudsen
- 4
-
Damned spelling check: THX my friend.
- 1
-
THX my fruens.
-
Hi all Guzzistis.
Ive installed, what I consider being the best mechanical cruisecontrol: "BrakeAway". It locks the trotthle-grib at preferred position, it is activated by pressing a button, and de-activates by pressing a second button. The genius thing is that if the brake-lever is activated, the cruisecontrol is immediately de-activated. Easy installation and use.
Se photos at this gallery:
http://www.v11lemans.com/forums/index.php?app=gallery&image=1963
and installation/function here (sorry, no Guzzi):
Greeting from Niels, DK
- 1
-
Hi All Guzzistis.
Ive made a little experiment: Is it possible to connect a bluetooth-enabled helmet to a handheld radio using bluetooth-setup with a wireless PTT.
My ingredients were a bluetooth-enabled helmet (Schubert C4), radio Baofeng UV-5R, and Louiton Bluetooth Earpice.
I only turned the helmet in pairing mode and the BT Dongle and the PTT on......Succes, Heureka, the Helmet connected to the Dongle, and I could listen and transmit via the wireless PTT. If my touring-companion makes a similar setup on his helmet and bike, then we can communicate effort- and wireless up til 5 kilometer, app. 3 miles.
See photos in gallery, at this link:
http://www.v11lemans.com/forums/index.php?app=gallery&image=1962
Greetings from Niels. DK
- 2
-
Hi All off you.
Ive now added a photo to the former added dropbox-link, showing the fuel-light activated because of low fuel level.
Greetings
Niels Knudsen, DK
-
Hello Maestro Kiwi. Yes The 82 ohm parallel to The fuel-led dies The job. I choose The T10 socket because I Can then go back to incandecent bulb socket T10.
THX for The origin guidelines.
Regards
Niels Knudsen.
- 1
-
Hi footgoose. Thank you. Leds are from Superbrigthleds.com, 5 leds 27,45 $.
T10 Sockets from DK carpartsuplier:
http://www.thansen.dk/product.asp?n=-295444903&pn=-295427429, 5 sockets 149,75 DKR = 23,62 $ collected.
Resistor 82 ohm 5 watt from conrad.dk. 1,12 $.
Greetings from The Country of The Vikings.
Niels Knudsen.
-
Hi everybody.
Followed the advice and guidance of KIWI ROY replacing idiot-lamps.
I hope you can see the photos and result on my Moto Guzzi Centauro on this link.
https://www.dropbox.com/sh/jke7k3ifc2guhj3/AABfWmVj_bthR1oSPV-sjbq7a?dl=0
Greetings from DK
Niels Knudsen.
- 1
Veglia rev counter showing half revs
in Technical Topics
Posted
Hi Condezaca.
It may be the loose counterweight-syndrom. See my post:
Greetings Niels