[PC545 still the way to go?]

Hi to all, 

My Stelvio's battery was fitted in Guzzi's factory in february 2008 and still does the job. It reads 11.8 volts after 4 weeks of non-use and stays there.

Its an AGM Yuasa made in USA, and, as far as i know, they are made in the same factory (that belongs to the Enersys group)as Hawker Odysseys and Genesys .batteries.

I had bought an identical replacement nbattery a good while ago just in case but so far so good with the 12 years old one..

Now we dont have severely cold winters in Cork.b

[Re-engineering the Shift Spring]

Lads, the specific forum for V11 in France is :

 www.forumtwinzone.fr

[Re-engineering the Shift Spring]

2 springs arrived in Cork, great initiative, thanks for all the work. Have you many of them left?

If so I could contact the french v11 forum and advertise.

[Rear brake lever]

16 hours ago, marktheaxeman said:

Hi Luc,

I like what you've done there - but I dont think that will work with my brake pedal as its not the standard one and doesnt have a flat edge to it. 

I think my foot rests will be in roughly the same position as yours though once i spin my rearsets around by 180 deg. Do you have any trouble with them grounding out at all?

Are they much more comfortable?

 

Cheers,

Mark.

 

Hi Mark,

yes , they are more comfortable as for grounding its not with the wet and greasy roads we have at present in the Cork-Kerry mountains that i will be trying to lean too far ...

I changed the bars as well for a second hand triumph set and between bars and foot pegs it makes for a much easier ride with less weight on the front wheel.

AND : heated grips...(used to be for Sissies but perceptions changes)

[Rear brake lever]

Hi Mark,

After Recently fitting lowered and advanced pegs i had the same problem with my brake lever this is how i extended it: simple and adjustable.

8 mm aluminium plate with a 10 mm s/s coach bold as a pedal. a milling machine is handy for the groove, but by no means essential.

 Hope it Helps.Greetings from (very wild) Cork tonight.

Luc

[Re-engineering the Shift Spring]

Hi there Scud,

Payment sent for two springs as well.

Thanks for your initiative its well appreciated.

Cheers from Cork.

[V 11 seat pad request]

Pete said that just the pad in the carbon covering is availlable new from Guzzi for E203!

I found a cowl from another fellow in France for E50. Its red an does not look too out of place on a greenie.

Making the usual mods on the bike at the moment:

- fitted bars that dont have me looking like a toad on a fountain spout and also a set of adjustable foot pegs.

-A Big blade 30Amp fuse  and its holder to replace 'melting no.3,

and i am making a pannier rack copying my friends genuine Guzzi one.

All that for an Alpine spin next june.

This forum has been a great help .

 

 

[V 11 seat pad request]

Pete from Reboot just told me recently that he does not have one, but  you could, if you realy realy want one absolutely buy a new one for E203 ...

[Show us yer Tontis!]

Yes the headstock is standard .the forks are from a T5

Frame paint is Ford tractor blue and was E10 a liter!

Hereis another picture of the fishtail, made by welding together different ready made sections of 'dairy tube' widely availlable.

[Show us yer Tontis!]

Built this a dozen years ago from a G5, but its now an 850 and still going strong,

lot of home made parts (exhausts, handlebars, battery box ,seat,)  John Williams  (tank shop)made the tank and mudguard

[What about Greenies?]

Hi to All,

  I have Been 20 years drooling over greenies, bought and sold a few other guzzies and still have a handfull from Airone to Stevio (now for sale).  I serviced a friend's Cafe Nero recently and could not keep my eyes off it: Marabese is a genius , it must be one of the cleanest  motorcycle design of all times.

 Anyway this same  friend told me of a Greenie for sale in Dublin, and it just happened that he had to go there in a couple of days. So we went , saw and conquered... without blood nor money changing hands. (straight swap)

So there she is, one of the earliest 99 Greenie  with ZGUKR0000111243 it makes it the 132nd produced and the engine at 111200 the 99th produced.

All original, new relays excellent body work but the usual eczema on the engine paint.: thinking of a quiet day with a dremel and a couple of beers. I have a 1985 T5 for over 20 years and the cases are just powerwashed from time to time with a thin coat of ACF50, they look finethat way and don't oxydate.

 I ordered some risers from China for a tenner including postage as i am not as flexible as i used to be and might fabricate a peg lowering kit myself in due time .

Anyway, I am looking forward to read your posts and exchange with you all, being an ignorant of all things electronic I will be needing your wisdom .resetting tps and all obscure things like that...i am in essence a magneto man : one wire from Mag to plug and basta!