griff Posted August 13, 2007 Share Posted August 13, 2007 have a splutter on tick over,replaced plugs and all the relays but still no difference,any ideas please chap's Link to comment Share on other sites More sharing options...
Guest Nogbad Posted August 13, 2007 Share Posted August 13, 2007 have a splutter on tick over,replaced plugs and all the relays but still no difference,any ideas please chap's Idle speed should be about 1100 rpm. First thing to do is check there are no air leaks from the inlet rubbers, then balance the throttle bodies and finally adjust the idle speed. If the bike runs otherwise ok my guess is the balance is a bit out, and the idle probably set too low. Link to comment Share on other sites More sharing options...
docc Posted August 14, 2007 Share Posted August 14, 2007 That's good advice from Noggie. My tach reads 300 rpm high so I have to set idle at an indicated 1300 to get a tick over of 1000. Setting to an indicated 1100 could make your Guzzi struggle to stay alive at 800 rpm. Link to comment Share on other sites More sharing options...
griff Posted August 15, 2007 Author Share Posted August 15, 2007 cheers for the advice,i give them a try when i get my suspension sorted Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now