Baldini Posted March 27, 2008 Share Posted March 27, 2008 I know there's some members have 70's Lavs/Dukes, so I'm posting here. I'm delinking brakes on T3/LM11, stock rear F08 caliper will not work well with std m/cyl. I am looking for a F09 Brembo caliper, preferably new as I'm told rebuild kits are no longer available. Brembo have discontinued this type. I think these were used on some Laverdas & pos Ducatis, so was going to try outlets for those bikes but does anyone know which models used them? Thanks, KB Link to comment Share on other sites More sharing options...
Greg Field Posted March 28, 2008 Share Posted March 28, 2008 Rebuilld kits are readily available. I rebuilt a pair of F09 calipers on Monday. At my shop, we almost always have F09 aluminum pistons and seals in stock. It's the new calipers that are hard to find. They were used on some BMWs, too. Link to comment Share on other sites More sharing options...
Baldini Posted March 28, 2008 Author Share Posted March 28, 2008 Rebuilld kits are readily available. I rebuilt a pair of F09 calipers on Monday. At my shop, we almost always have F09 aluminum pistons and seals in stock. It's the new calipers that are hard to find. They were used on some BMWs, too. Thanks Greg. Yes, I've been told BMW shops here supply rebuild kits. Neither of the Guzzi shops I normally use carry them - one saying 2yr back order, the other just not interested. Guzziology mentions I can use a master cyl(3066 6060) from a 96-97 Cali 1100 - would you know is this a direct replacement to T3 type using same mounting point? I know it is remote reservoir & I can find somewhere to put that. Thanks again. KB Link to comment Share on other sites More sharing options...
Greg Field Posted March 28, 2008 Share Posted March 28, 2008 SO, the rear m/c? I have never done it, so I'm not sure what's involved with that. Is your stock master cylinder in that bad of shape that it can't be rebuilt? Link to comment Share on other sites More sharing options...
Baldini Posted March 28, 2008 Author Share Posted March 28, 2008 Greg, I'm advised that the stock F08 (which is what I have, tho I'm looking for a F09) caliper doesn't work w/ stock m/cyl. I need a smaller bore. Either change caliper or change m/cyl... thanks, KB Link to comment Share on other sites More sharing options...
Steve G. Posted March 29, 2008 Share Posted March 29, 2008 Here you go: http://www.angelfire.com/biz/laverda/itcatalog/mainframe.htm You need Brembo, here it is, everything! Wolfgang's in Italy right now buying more Italia. Steve Link to comment Share on other sites More sharing options...
Baldini Posted April 5, 2008 Author Share Posted April 5, 2008 Here you go: http://www.angelfire.com/biz/laverda/itcatalog/mainframe.htm You need Brembo, here it is, everything! Wolfgang's in Italy right now buying more Italia. Steve Thanks Steve, i've emailed him. F09 is difficult to get hold of. KB Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now