rideblue1 Posted November 15, 2008 Share Posted November 15, 2008 Hi,finish on rocker covers is starting to bubble and lift,the alternator cover is in a much worse condition.I want to get all three items cleaned back to bare metal and then a new finish applied. I once had the rocker covers off an old BMW blasted and then stove enameled and was really pleased with the result. Are the three items off my V11 made of suitable materials to have this process carried out? If not then what would be the best cleaning and finishing techniques to get done? Thanks in advance. Link to comment Share on other sites More sharing options...
richard100t Posted November 15, 2008 Share Posted November 15, 2008 Hi,finish on rocker covers is starting to bubble and lift,the alternator cover is in a much worse condition.I want to get all three items cleaned back to bare metal and then a new finish applied. I once had the rocker covers off an old BMW blasted and then stove enameled and was really pleased with the result. Are the three items off my V11 made of suitable materials to have this process carried out? If not then what would be the best cleaning and finishing techniques to get done? Thanks in advance. yes! Link to comment Share on other sites More sharing options...
fotoguzzi Posted November 15, 2008 Share Posted November 15, 2008 how about just polishing them? Link to comment Share on other sites More sharing options...
richard100t Posted November 15, 2008 Share Posted November 15, 2008 how about just polishing them? yes you can go that way as well. I've seen some impressive results from polishing Link to comment Share on other sites More sharing options...
Guzzirider Posted November 15, 2008 Share Posted November 15, 2008 I have stripped off the paint from my Jackal valve covers- and have polished them several times on my bench- beginning to look good. Will post pics when I have finished. Have bought some Belgolm Alu to coat them with when I have finished to prevent corrsion. Guy Link to comment Share on other sites More sharing options...
rideblue1 Posted November 15, 2008 Author Share Posted November 15, 2008 I've thought of polishing but when I've done this in the past the metal soon dulls.If a lacquer is applied then it yellows after a while. With stove enameling the finish stays spot on and is easy to keep on top of. Thanks for all the input but at the moment stove enameling gets the vote and is something I can get done locally. Thanks again. Link to comment Share on other sites More sharing options...
edge Posted November 16, 2008 Share Posted November 16, 2008 FWIW; I had mine professionally polished 4 years ago to get rid of a bit of road rash on one of the covers Both covers and repacment head guards came out wonderful and still look good today without any polishing beyond normal cleaning. No laquer or other coating applied either. I've thought of polishing but when I've done this in the past the metal soon dulls.If a lacquer is applied then it yellows after a while. With stove enameling the finish stays spot on and is easy to keep on top of. Thanks for all the input but at the moment stove enameling gets the vote and is something I can get done locally. Thanks again. Link to comment Share on other sites More sharing options...
twhitaker Posted November 16, 2008 Share Posted November 16, 2008 I may be a bit prejudised bit there is another option. That's not anodize. That's 24k. Link to comment Share on other sites More sharing options...
moscowphil Posted November 16, 2008 Share Posted November 16, 2008 The engine, gearbox and final drive box on my old T3 were completely unpainted - all rough cast apart from the rocker covers and alternator cover, which had been mirror polished. It took some keeping up to (lots of solvol autosol), but after 20 years still looked as good as when it was new, and much classier than any painted finish. And think of the weight saving! When I get tired of black that's what I'm going to do with my Scura. Could be hard work getting all that paint off though! Link to comment Share on other sites More sharing options...
rocker59 Posted November 16, 2008 Share Posted November 16, 2008 I've thought matte chrome would look cool on these parts. Link to comment Share on other sites More sharing options...
rideblue1 Posted November 17, 2008 Author Share Posted November 17, 2008 Thanks all. You have certainly gave me food for thought as the saying goes.Just been out to the workshop to take off the alternator cover and all the bolts came out easily except one! It's seized solid so whilst I struggle with the little bugger I will think about what finish to give the cover if it ever comes off! Link to comment Share on other sites More sharing options...
Foxy Posted December 2, 2008 Share Posted December 2, 2008 I found Halfords satin silver finish engine paint is a good match for the grey alternator cover on my V11, and has so far lasted considerably better than the stock paint. My rocker covers are bare polished metal, which made polishing out some scratches from a crash rather easier. Link to comment Share on other sites More sharing options...
Darius Posted December 3, 2008 Share Posted December 3, 2008 Perhaps another option might be ceramic coating like JetHot. This is used on exhausts as well as engine parts and is supposed to be pretty durable. Link to comment Share on other sites More sharing options...
rideblue1 Posted December 3, 2008 Author Share Posted December 3, 2008 Just picked up the alternator cover after having it stove enameled,the finish looks great so I think I'll get the rocker covers done with the same finish in the future. Link to comment Share on other sites More sharing options...
dhansen Posted December 4, 2008 Share Posted December 4, 2008 Just picked up the alternator cover after having it stove enameled,the finish looks great so I think I'll get the rocker covers done with the same finish in the future. How about a photo rb1? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now