Kostarika Posted March 20, 2014 Share Posted March 20, 2014 Time to start working on the bike before the nice weather gets here (above freezing) A few of the things that i have collected Gained a few pound over the winter so the bike has to loose some. Pete helped with this And I couldn't find a Oil pressure gauge that I liked so built my own set up. Plus the usual tank off maintenance stuff that is planed one of these weekends. Sorry for the grainy pic K 2 Link to comment Share on other sites More sharing options...
docc Posted March 20, 2014 Share Posted March 20, 2014 Mmmmmm - nice cf goodies! Link to comment Share on other sites More sharing options...
tikkanen Posted March 21, 2014 Share Posted March 21, 2014 You're going the Scura way with those shine CF bits, Kostarika, and how can I can disagree) Also have the Roper plate, so roll on Spring. Pissing down here as always but Spring is lurking around the corner, they say. Have a great weekend and good luck with your bike. Cheers Søren Link to comment Share on other sites More sharing options...
Kostarika Posted April 17, 2014 Author Share Posted April 17, 2014 Slow but steady Had a switch in the fairing from the previous owner that might have been for a led light by the fairing and it was not hooked up to anything. So I put it to use and that is where i decided to mount the oil pressure gauge. Hopefully this will be the weekend that I can give the bike the attention it deserves. Been to busy riding this one but I always wish I was on the Guzzi every time I open the garage. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now