JuhaV Posted December 12, 2004 Share Posted December 12, 2004 Hi, Sorry, this might be a slightly Sport 1100 related thing, do not know if V11 uses the same type of tensioner. My question is : Is it possible to change the cam chain tensioner without removing the sprockets and the chain ? Can I slip the the tensioner away from behind the chain somehow ? I would like to avoid opening the sprocket nuts if possible. I believe that the chain and sprockets are still ok after about 30 000 km. In my earlier bikes I have used the aftermarket longer curved and spring-loaded tensioner instead of the original type. Any idea which type works better keeping the chain tight. Any comments appreciated. See attached (poor quality) pic for more details. br, JuhaV Link to comment Share on other sites More sharing options...
jrt Posted December 12, 2004 Share Posted December 12, 2004 Hi JuhaV, I've never had any success changing the tensioner without removing the three sprockets. It's too tight a fit and the bolts are right behind the chain. Arrgh. Removing the sprockets is pretty easy though. (this from working on Tonti frames) Don't know which style is better- I've heard the spring type makes more noise...dunno if that's true, and dunno if it affects performance The spring type is a lot cheaper though, and it seems like it's a fine design. Regards, Mr Ambivalence Link to comment Share on other sites More sharing options...
BrianG Posted December 12, 2004 Share Posted December 12, 2004 Is this the place to ask about cogged belt conversions? Link to comment Share on other sites More sharing options...
twhitaker Posted December 12, 2004 Share Posted December 12, 2004 Is this the place to ask about cogged belt conversions? 38788[/snapback] I don't think so. I believe all that is available is chain or gears. Link to comment Share on other sites More sharing options...
helicopterjim R.I.P. Posted December 12, 2004 Share Posted December 12, 2004 Perhaps you could buy a lathe and come up with a toothed belt conversion? Let us know if you have any luck! Link to comment Share on other sites More sharing options...
jrt Posted December 12, 2004 Share Posted December 12, 2004 There IS a cog-belt available, but not for FI bikes. scroll down 1/2 way Link to comment Share on other sites More sharing options...
twhitaker Posted December 12, 2004 Share Posted December 12, 2004 Seems the most common reason I open my mouth is to exchange feet. I like the belt design. Wonder if there is a way to rig the ignition timing pickup? Link to comment Share on other sites More sharing options...
pete roper Posted December 13, 2004 Share Posted December 13, 2004 While it obviously does work I don't much like the idea of running a gilmer belt, even if it's supposed to be able to take it, in oil and everyone must know how much I despise the commnly available gears The V11's all have the *late model* tensioner picured above. Now while I tend to think it has a bit of a pissy little spring and looks a bit inadequate the imfamous Ken Hand has covered some absurd mileage on his '98 EV with the same tensioner and the whole thing is still quiet and the timing accurate so I suppose that is a fairly good indicator that it's a good unit that does the job. Certainly if your V11 has done less than 80,000 miles/120,000 Km I wouldn't worry about swapping out the chain. I use a lot of the 'Valtek'/ Stucchi 'Blade' type tensioners. Both my SP and the Mighty 'Vert have them in and I see them as a great way of ensuring that a chain will last in excess of 120,000Km, I've seen many go a lot further! If you do replace the chain and tensioner I really, really don't think it's worth trying to do it without removing the sprockets. Doing so isn't a big job and if you do you can pull the oil pump while you're in there and check it too. Like so many things on a Guzzi people try and save themselves the hassle of removing some part during a service operation and them make the job about ten times more difficult and time consuming. Don't bother. It's not rocket science and when you've done it you'll wonder why you were ever worried!!!!!! Pete Link to comment Share on other sites More sharing options...
antonio carroccio Posted December 13, 2004 Share Posted December 13, 2004 My question is : Is it possible to change the cam chain tensioner Yes it is. Ask Goran. BTW I have a chain tensioner new for sale ( 20,- Euro). I have changed my camshaft you know... Let me know if you need a new one. ciao Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now