Jump to content

Race Tech Fork Spring Rates


Recommended Posts


Anyone tried Race Tech fork springs, and what spring rate worked for you? In a 01 V11 with 190 lb rider, their site shows .90 kg/mm. A good Guzzi tech told me people like 1.0 for RT springs…..RT says that will be very stiff. Would love to hear what has worked for you.

I’ve read good things about RT, I think GuzziTech uses them, and they’re just down the road from me!

Link to comment
Share on other sites

Kane,  when my front end was rebuilt it was fitted with both a 0.9 and a 1.0. I cannot say which spring went where. The springs were only part of the equation along with an Andreani valve kit in 26mm. Interestingly the oil that was used was 20 cSt as opposed to the usual 26 cSt recommended for Marzocchis The stock front end is atrocious with next to no compression damping. New springs would help a little but a deeper dive into the forks would give much better results. Race Tech would be a good place to start for either springs or a full front end rebuild.


  • Thanks 2
Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...