Kevin_T
-
Posts
91 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Community Map
Posts posted by Kevin_T
-
-
I've heard of high mileage
-
I've of high mileage heads cracking through the valve guides it would great to know if it was caused by inclusion or porosity buried inside the head. For sure what you suggested is in order. I mean that's probably the place to start a project like this.
I got to say if hasn't already been said owning and working on a daytona motor is not for the faint of heart.
-
1
-
-
I was wondering if x-ray inspection would be cost prohibitive. It would be nice to know what kind of swiss cheese your working with before spending a ton of money. Looking at a few website and what they offer was amazing, but I'm in no position to give them a head for a quote. Some of the images they were showing must have been done with MRI imagining. If they charged what the hospital charges my insurance that's a no go. Kind curious what the minimum amount of information would allow me to move ahead with confidence.
-
Don't have much experience with Ti cans, but I just cut into a Satintune can trying to repair it. They used stainless steel wool for the packing pretty sure its 434 alloy just slightly magnetic. Water is a by product of combustion and combustion is never complete so you end up with products like carbonic acid or nitric acid its not just a heat issue. They ended up using about a #3 grade.
I wouldn't use stainless steel wool directly against your Ti skin but make a hybrid packing. Lay some lateral strips to build up the oval shape and use your old winding to finalize it. The old packing doesn't look that bad just clean it up with some dawn dish soap. Let it soak a couple days and rinse. No offense but there is not much stoichiometry happening there, its not burnt its probably just soot.
One thing I did find interesting when I cut into the Satintune can is the lack of packing material right where the perforated tube entered the muffler. It was definitely about an inch and a half that was bared. It was there for a reason why I don't know. I never heard the Ti cans but when you pull the db killers out of the Staintune its about the most perfect sound I can imagine for the V11.
-
1
-
-
Kurt I hope you still visit this site. I was wondering why the picture of your crossover looked so milky or cloudy?
-
This is awesome John truth be told I thought the pump was the problem just figured sloppy cut-off point for the gears in the housing. Hey I thought the relief vale was only along for the ride. I don't want to worry you but you are dealing with systems here and changing one thing effects a whole lot of other things. Not trying to put a spin on your work I plan to follow in your footsteps. I'm can't think for the life of me why Guzzi didn't do something with this. I mean as a manufacturer they would have a vast amount of data to look at.
What weight of oil were you using for your test? Here is a crazy idea if the spring controls pressure switching to a lighter wt oil might increase the volume of oil as a cooling media (might also take your oil cooler). You might lose a couple psi but gain a little horsepower over a 60 wt oil
-
1
-
-
Those bags appear to be in great shape. I'm interested in them how many liters are they? P.M. me with some pictures if you have any more and well see what shipping cost comes to.
-
Well its important to keep ones proper perspective in life.
-
Well its like when I was growing up listening to Paul Harvey, "Now I know the Rest of the Story".
Didn't know that thanks for the enlightenment.
-
I tried to get one off of Harper's about a year & half ago but they just kind of blew me off.
-
I'll take it off your hands
-
1
-
-
I was looking at Gritman's post and he made no mention of fooling around with the ignition timing. Did you speak with him if he did?
I'd imagine the requirements in the ignition timing between a hemispherical head of the V11and the pentroof head of the high cam would be quite different.
-
If you haven't already you should do a leak down test. The engine might just be broken in but its full of dissimilar metals. Chances are 99 out of a 100 there is nothing wrong, still its good to know. You could have a valve that open just a crack or there is some galvanic action going on.
-
1
-
-
Chuck you can put me down for one.
-
Seeing those coiled tubes reminds me of the saying "What goes around comes around" I use to tell a bad joke. What is the difference between a Harley and a Hoover?
Harley(Davidson motorcycle) and Hoover(vacuum cleaner) Seeing that picture makes me the butt of my own joke.
-
Neil, the shipping cost wasn't as bad as I thought it was going to be. Would you quote me a price for the mufflers?
-
I'm interested in the muffler hangers and riders footpegs.
PM me please
-
So Kane, just how many miles do you have on your bike? I don't think having a clutch that drags is a normal condition. I mean it didn't do that when the bike was new did it?
I just bought this Lemans so I don't have a lot of miles on it, but the condition you describe was a signal to replace the transmission input hub on my Elderado. In the 100k plus miles I put on that bike I think I replaced 3 of them. The Elderado didn't have a cush drive so 35k was about all they were good for. If you have less then 50k you might want to make sure the cush drive in the rear hub is lubed and well serviced.
-
1
-
-
If you could add another person, I would like 3 springs.
-
So... I wanted to wait until I had something a little positive. While ordering an oil pump gear from Joe Caruso I asked him if he would have any interest in making a transmission input hub that would fit the Ram clutch and he seemed genuinely interested. Before you get your hopes up he is going to confer with his gear guy if he has the tooling. This might be a no go right from the start, but if he does is there any real desire for this hub? To me it sounded like there was but once people start talking money things can change real fast.
Some people have made the conversion but I didn't see any real feedback is the Ram clutch a worthwhile mod? I know its too early to come up with a price it cost me 600.00 for the clutch and with the hub it could push the cost to a cool grand for a six speed conversion.
Any way just putting it out there still testing the waters. I hope sp838 took some good dims.
-
1
-
-
I have a six speed box and a five speed box plus the Ram clutch conversion in front of me so I might be able to help.
If I were you I would take that input hub and a little valve lapping compound and remove any binding that you referred to. Then I would send it off to Swain's coatings to have it poly coated. I just don't think your going to be seeing to many more of those. The splines are subject to wear if you don't grease them and its just not a five minute job so could get neglected. In the past I would just replace the input hub when the clutch started to drag as my time was more valuable.
Like everyone said it should fit right up. The bell housing have different shapes between the 5 and the 6 speeders with the bearing for the mainshaft on the 5 speeder being recessed, but the outer diameter has the same depth. You might want to use some clay at potential contact points and dry fit if you have concerns, but the push rod is probably your only problem that I see.
-
2
-
-
On 5/25/2019 at 7:40 PM, pete roper said:
I had one Daytona RS that had one 'A' kit cam and one 'C' kit cam. That had me buggered.
Ok so I'll bite PLEASE tell that wasn't a factory job!! I wrote that with a little smirk on my face but after careful contemplation I scared of what the answer might be.
(Nutter) Quietly raises hand, looks at ground while gently kicking dirt in a circle.
Since your on the subject of Moto Guzzi innovations and your motor is done for the most part let me ask a question. I just bought a 2002 v11 Lemans about a week ago never really looked that closely before at the frame. The Lemans has a strut from the frame to the engine case just under the tranny does stabilize the engine, increase handling? Just what are the benefits? Do I want to weld a lug on to the engine case for my v11 project. Is it worth change the exhaust system for?
-
Thanks Pete just got mine. Even has your logo so there can be no doubt where it came from!
-
I would have gotten back sooner but I still need to do a few things before I really get into the motor. What I did get (with a feeler gauge) is left cylinder exhaust rocker arm .004 inch, intake rocker arm .008 inch. The right cylinder exhaust rocker arm .010 inch, intake rocker arm .009 I believe this is what the factory passed on. So .008 or .2 mm should be correct I would think any expansion would only increase this dim.
The Daytona Dr John search for missing bikes.
in Older models
Posted
Are those pods on the end of the velocity stacks? (oh, oh)