belfastguzzi Posted December 9, 2010 Share Posted December 9, 2010 It's been brought to my attention that the photos relating to the pawl spring, boss and the rest of the transmission box are not on the web anymore. Unfortunately, I see that all the V.11 related photos that I had on the old homepgage.mac site are gone. This application/website is no longer supported. The photos are still on web storage ok, but the links don't work. When I get time, possibly over Christmas, I'll make a new site or get them up somewhere. Meantime, if anyone wants to see photos of the spring repair or replacement and knows what they want in particular – get in touch. David Link to comment Share on other sites More sharing options...
belfastguzzi Posted December 28, 2010 Author Share Posted December 28, 2010 For now, the pics can be seen on Flickr, here > Transmission Spring These are not in order and there are no comments or notes. The comments are still on the old unsupported site, but the photo links are gone. http://homepage.mac.com/davidboyd1/GuzziRepairs/PhotoAlbum26.html http://homepage.mac.com/davidboyd1/GuzziRepairs/PhotoAlbum28.html After a lot of years, I'm still receiving emails and queries about these so if you want clarification on anything, contact me at belfastguzzi@me.com Link to comment Share on other sites More sharing options...
belfastguzzi Posted August 10, 2011 Author Share Posted August 10, 2011 Gearbox Pre-Selector Spring and Pawl Arm Boss Repair procedure as documented in 2004 including a roadside repair method. The web pages that I made a long time ago (2004) with photos of the spring fix are no longer working. I still receive regular enquiries and requests from various parts of the world regarding the infamous broken spring issue. The springs are continuing to break, so at root, it's probably a bad design and even having the correctly spec'ed parts won't always avoid the consequences. I've rescued what photos I can from web server. Yesterday, I received two requests for info and photos, from opposite sides of the globe. That has prompted me to get the photos into a FAQ topic on the site here. Link to comment Share on other sites More sharing options...
belfastguzzi Posted August 10, 2011 Author Share Posted August 10, 2011 The web pages that I made a long time ago (2004) with photos of the spring fix are no longer working. I still receive regular enquiries and requests from various parts of the world regarding the infamous broken spring issue. Yesterday, I received two requests for info and photos, from opposite sides of the globe. That has prompted me to get the photos into a FAQ / How To topic on the site here.Clearly the springs are continuing to break, so at root, it's probably a bad design and even having the correctly spec'ed parts won't always avoid the consequences.Gearbox Pre-Selector Springand Pawl Arm BossMy repair procedure as documented in 2004including a roadside repair method.Please see the exploded parts diagram and the detailed instructions on disassembly and fitting that are already on the site and are referenced with links in the FAQ sub-forum.I originally posted some of these pics in 2004 discussions on the V.11 Forum in this thread1) hereand the roadside repair one is2) here3) and actual roadside job is here----------------------------Edit 26 Feb 2016. I still receive queries about this every year – and sometimes asking to see the photos. NB - the photos in the original posts above were lost a long time ago, so I posted them, or small, rescued versions of them, in the posts that follow here. Scroll down to see the photos. 1 Link to comment Share on other sites More sharing options...
belfastguzzi Posted August 10, 2011 Author Share Posted August 10, 2011 New sized parts have been available for a long time now. The spring has a bigger coil, to allow for the oversized bosses that were on the bad batch of pawl arms. All new springs should have the wider coil, unless you buy from someone who still has very old stocks. If you get a new Pawl Arm, it should have the 15mm boss, not the 16mm boss that appeared around 2002. >> April 2005, Moto Guzzi Technical Bulletin Problem: broken gear change pawl spring Solution: In case of breakage of the pawl spring A in vehicles with frame numbers before KT111435 - KS112350, the pawl B should be changed (when asking for the spare part, you automatically receive the pawl updated version). The change consists in the reduction of the diameter on which the spring rests from 16 mm to 15 mm. Part nos: 04 23 51 01 for the new arm, 04 23 83 00 for the OEM spring. Springs are still breaking, so while it is best to have the correct size of pawl arm and spring, it's not a guarantee that it won't break again. It must just be a flawed design. Here is a summary instruction, previously provided on the Forum. > Box in NEUTRAL. Detach shock reservoir from bracket. Isolate battery. Remove starter motor. Detach neutral switch term. Detach shift link from shaft. Drain gbox oil. Remove 11 (5mm) socket cap bolts. Remove Selector cover plate (there's no gasket, goo holds pretty firm). Remove 2 selector gears (retained by circlips) & mechanism, to access spring. Ensure NEUTRAL in box (check spaces between sliding dogs & gears are equidistant) & in selector before replacing plate. Move the selector forks into the neutral position before replacing the side plate (rotate the rear wheel to confirm neutral - if the plate doesn't go on you've got a false neutral). Main thing is get box in neutral with selector forks equally spaced from sliding sleeves before putting the cover back on. Also, selector wheels in Neutral. There's no gasket on cover. Use sealant/gasket cement. ---------------------------------- Link to comment Share on other sites More sharing options...
belfastguzzi Posted August 10, 2011 Author Share Posted August 10, 2011 How To Make Repairs if you don't have new parts. If you do have new parts, the pics here give a guide for checking sizes, fitting and possible re-profiling. Gearbox Pre-Selector Spring, repaired Pawl Arm Boss, resized Shift Plate, re-profiled Spring Repair or Replacement My spring broke at 1,200 miles leaving the box stuck in 4th gear. The spring bend hooks onto and is pulled against a sharp edge. The spring coil tightens and binds on its oversize pawl-arm boss when it is operated. The resulting stress causes the spring to snap. This break may also happen on 'properly sized' parts due to the same stress, but at a higher mileage. I did not have a spare/new spring so I made a repair by bending a hook onto the broken spring and re-shaping the spring coil accordingly. This worked fine. A new spring was fitted later. When doing this, I tried a 'roadside repair' method. This was originally posted as a separate topic. The photos are incorporated together here. Link to comment Share on other sites More sharing options...
belfastguzzi Posted August 10, 2011 Author Share Posted August 10, 2011 Photos from my old Guzzi Repairs web album. I have incorporated the photos from the separate album, which was called, A Roadside Repair Is Possible. A broken spring could be repaired out on the road. Lean the bike over to keep oil in gearbox. The biggest problem is access past the support tube to bottom Allen screws, so it is best to carry a modified Allen key. Carry a spare spring, or if you don't have one, or suffer 2 breaks on a trip (!) vice grips as well as pliers will help to bend the broken spring. If you want to be totally prepared, carry a file incase you need to reduce the pawl arm boss from 16mm to 15mm! (Or pack a spare pawl arm as well as a new spring.) (These photos were taken at 1,200 and 1,400 miles.) 1 Assemble tools appropriate for Guzzi repair. ok... these ones... Tools are easily carried. If no spare spring available, grips are also needed to grasp and bend the broken spring. Allen key. I filed the edges off and cut the short end shorter, to get at lower cover screws. 2 For a roadside repair, the bike would be leaned over to save oil in box. It should be a bit more, but garage space here is too narrow. Actual roadside repair procedure, side of motorway a long way from home (2006 photos) 1 Link to comment Share on other sites More sharing options...
belfastguzzi Posted August 10, 2011 Author Share Posted August 10, 2011 3 Selector plate off. 4 Original gear oil (1,200 miles). Metallic paste residue that lies in bottom of box after oil is drained off. 5 Oil saved in leant-over box. This is the later 'roadside repair procedure' photo at 1,400 miles. There were a lot of metallic filings in oil again. 6 Broken spring. Hooked end has snapped off. Broken spring end on edge of plate. Spring break at hook bend. 7 Sharp edge of shift plate that spring hook pulls against on downshift. 8 I re-profiled this area of shift plate. Left side cut in to make better seat for spring hook. 9 Broken spring, end bent to form a new hook. 10 Later: a new, full-size spring on my re-shaped plate. It now doesn't seat in the corner. 11 A bit more work was done to better accommodate the new, full-size spring. Link to comment Share on other sites More sharing options...
belfastguzzi Posted August 10, 2011 Author Share Posted August 10, 2011 12 The original pawl arm boss that I think caused the failure: it's over 16mm diameter. It should be 15mm. The ratchet arm boss holds the spring coil. I filed down the ratchet boss to just under 15mm, with the boss offset so it is shorter at rear. I forgot to photograph the ratchet arm/boss. New pawl arm boss (15mm) and my filed-down, re-profiled from previously oversized (16mm) boss. 13 Inside coil diameter. 14 Repaired spring. I bent a new hook on broken end and reshaped rest of spring. 15 This is the repaired broken spring on re-profiled shift plate. It worked fine. 16 Spring coil no longer binds. I am confident that the repaired spring would have continued to work fine. 17 Back together and ready to replace. Link to comment Share on other sites More sharing options...
belfastguzzi Posted August 10, 2011 Author Share Posted August 10, 2011 18 When I later got a new spring, I compared it with the repaired, re-bent spring. Old broken spring, repaired. New spring. Repaired broken spring beside a new spring. 19 New spring and new pawl arm, with correct size boss on the other side. New pawl arm boss (15mm) and my filed-down, re-profiled from previously oversized (16mm) boss. 20 View of all the spring contact points. 21 The three gearbox selector springs. Link to comment Share on other sites More sharing options...
belfastguzzi Posted August 10, 2011 Author Share Posted August 10, 2011 I found this pic that I made once, showing how the parts relate. It's a bit messy! --------------------------------------- I'm still sorting these pics / this topic post. I should probably do a condensed version which just deals with doing the repair, as people have said that it's useful for printing as a worksheet for taking on trips – just in case! Link to comment Share on other sites More sharing options...
docc Posted August 17, 2011 Share Posted August 17, 2011 I remember 2002 saying to MGNA and my dealer, "My gearbox doesn't shift right." 81 emails later, and with my dealer's support (Ben Curlin of Jackson, TN), the gearbox was replaced. In that time, I was directed to this forum , the early units were recalled, and , as I said in those days: if there is an expert on the six speed Guzzi gearbox - it are us.<_> Almost ten years on, it turns out, it is us; if "us" is belfastguzzi. Thanks, David, for the persistent support and dedication that can be found no where else! Link to comment Share on other sites More sharing options...
fotoguzzi Posted August 17, 2011 Share Posted August 17, 2011 thanks a lot for re posting these photos.. I never had a problem but I carry a spare spring.. now I'll print the directions so I will know what to do roadside if it happens to me. Link to comment Share on other sites More sharing options...
fotoguzzi Posted August 17, 2011 Share Posted August 17, 2011 on the roadside shot, why did you remove the header, does it have to come off? Link to comment Share on other sites More sharing options...
belfastguzzi Posted August 17, 2011 Author Share Posted August 17, 2011 on the roadside shot, why did you remove the header, does it have to come off? Good observation. I must have needed the clearance to get something off: the starter? It's the Quat header, which has a different bend than the stock V11 pipe. The standard MG header doesn't have to be removed. Link to comment Share on other sites More sharing options...
Recommended Posts