gstallons
-
Posts
5,196 -
Joined
-
Last visited
-
Days Won
70
Content Type
Profiles
Forums
Events
Gallery
Community Map
Posts posted by gstallons
-
-
Aside from bikes and similar side pieces , I figured we all had other things in common .
-
2
-
-
2 hours ago, guzzler said:
G'day mate
It's a Stihl 16 inch. ( petrol ).
We bought it about 10 years ago when we moved up into the hills ( Yarra ranges )as we were told it be handy to have up there.
Then we bought here in Gippsland and installed a wood heater, never knew the saw would get so much use,It's been brilliant in all that time!
Cheers
JW , I have four Husqvarna saws
-
2
-
-
Being nosey , what brand of saw do you use ?
-
Sure thing . PM me your address and I will send you a check . You can then mail it to me .
Gene
-
Do you still have this or did you sell it ?
-
13 hours ago, docc said:
Then there is this . . .
From that same source the 12162281 black connector is $3.55 each, the grey 12162280 is 99¢ . . .
We're only after the seal. Get the grey!
You stole my thunder , Docc . The connector(s) I recommended were so a person could use the seal and toss the rest .
9
-
1
-
-
Remembering the past so you will not repeat it again . After my heart operation , my memory is about like Leanord in the movie Memento ! with that being said , I can remember my F-ups !
-
1
-
-
That won't happen again
-
2
-
2
-
-
The education is good , it's the tuition that eats you up !
-
3
-
2
-
-
Glad to hear !
-
1
-
-
Unsprung weight savings , I'm all in ! What is all the goop on the drain plug ?
-
Noooo. the omly way to fix this is with a new one. It seems like this seal and Deoxit are not compatible . I use Motorcraft electrical grease . It is available through Ford dealers . the compound is made by NYE lubricants . This stuff is for computer circuit boards , aircraft applications , etc. High tech and a fair price .
I use dielectric grease in spark plug boots & that's about it.
-
1
-
-
You gotts do what you gotta do !
-
1
-
1
-
-
1 hour ago, docc said:
Our V11 LeMans/Sports have an elegant breather vent on both the reardrive and the gearbox.
Why not add one to your Quota reardrive and loose the "artisan" solution?
Did you finally get your rear end to not leak ?
-
2
-
-
A vented system will keep the rear end at a constant ":pressure" and you will not have TROUBLE
-
2
-
1
-
1
-
-
TE Connectivity 282087-1 AMP Superseal 3 Position Plug Housing | Waytek (waytekwire.com)
Eureka !
And you will not break the bank with this price . I purchase a lot from this place . They sell quality parts .
-
2
-
2
-
-
Yeah .......that is what we are not looking for.
-
2
-
-
You do want to keep it conservative with changes . You don't want to end up with John Lennon's Rolls Royce.
Little things will be noticed by the people that need to notice things .
Sent from my moto z4 using Tapatalk-
5
-
1
-
-
My bike came w/the K&N setup. I didn't like the noise and reinstalled the factory airbox.
You might replace the air filter once every 3 years so don't worry about it .
-
3
-
1
-
-
That's the same place I ended up with.
-
I think I have found a source for the TPS connector seals . www.customconnectorkits.com
Look through til you see the AMP section. I hope this will work w/the price WAY less than $5.00 ea.
-
OOOhhhh the rod , yeah it will just drop out , put it back in , you're good !
-
1
-
1
-
-
Maybe you dropped piston only . can you reinstall ?
-
Hmmmm. Explain . did you lose brake fluid too ?
Silly fast
in Special place for banter and conversation
Posted
No , you're gonna love it. Don't expect wheelies , stoppies or whatever else they call these stunts . Just fun . You now are officially a weirdo !