Jump to content

What's your "to do list" ?


mznyc

Recommended Posts

Since doing a full tune-up last year, haven't done much to the old girl since, other than changing the oil.She's due for some maintenance and upgrade mods that should have been done last off-season.

1)Pawl spring(Shifting's been nothchy)

2)Bevel box-gear box fluid change

3)Front wheel bearings

4)Steering head bearings

5)Brake and clutch fluids replaced

6)Headlight relay mod

7)PC3

8)Mistral X-over pipe

9) Replace Throttlemeister with Vista Cruise and Manic Salamander bar ends.

10)Have custom made quick release luggage rack for Givis fabricated by local welder

11)Install heated grips

12)Install oil pressure and volt analog gauges

13)Replace cracked headlight bucket

14)Replace various screws and fasteners that have come loose

15)MG Carbon Fiber rear mud guard (Anyone got one?)

16)Replace mirrors with BMW Rockster mirrors

PS Oh Yeah,not that it's important, :rolleyes:

17)Haven't replaced fragile Scura clutch yet (Stoopid Guzzi) :homer:

18)Lube throttle cables

19)Various sweats and leaks

20)CF Alt cover

21)Airbox mod

I'm sure I'll think of something else,.....

And so on,.....

What have you been putting off,wishing to do?

Link to comment
Share on other sites

Since doing a full tune-up last year, haven't done much to the old girl since, other than changing the oil.She's due for some maintenance and upgrade mods that should have been done last off-season.

1)Pawl spring(Shifting's been nothchy)

2)Bevel box-gear box fluid change

3)Front wheel bearings

4)Steering head bearings

5)Brake and clutch fluids replaced

6)Headlight relay mod

7)PC3

8)Mistral X-over pipe

9) Replace Throttlemeister with Vista Cruise and Manic Salamander bar ends.

10)Have custom made quick release luggage rack for Givis fabricated by local welder

11)Install heated grips

12)Install oil pressure and volt analog gauges

13)Replace cracked headlight bucket

14)Replace various screws and fasteners that have come loose

15)MG Carbon Fiber rear mud guard (Anyone got one?)

16)Replace mirrors with BMW Rockster mirrors

And so on,.....

What have you been putting off,wishing to do?

 

Change Oil... Keep riding... maybe wipe a few bugs off.

 

Oh and Build the exhaust for the Ducati...

Link to comment
Share on other sites

I have a set of FBF pistons I bought from Antonio for half the original price. I'll send my heads for overhaul and pop the pistons in. I also found a good dyno guy that I trust will make the best of the lot next spring, and I'll try mapping it for E85 just for the hell of it. It will not be flexifuel nor environment friendly, just max power. I'll need to up the fuel pressure or fit larger injectors. If I ditch the E85 idea I'll send the present injectors for cleaning instead.

 

New steering damper is on the list too as well as a full set of new brake pads. Possibly brake lines too, she's over 12 years old now. Oh, and a front tyre. Oh yeah, and a new LED tail light. The clear-glass one I've got ruins the look. Money money money :huh:

Link to comment
Share on other sites

I am putting new seals/bushings in the front (Marzocchi) forks. After looking at the invoice yesterday I am going to have to rob a bank first thing Monday morning.........

Link to comment
Share on other sites

V11- good cleaning, oil change.

Aprilia - Ohlins rear shock. oil change. maybe new mufflers, maybe.

BMW - oil change, check valves, t-body sync, abs, brake & clutch fluid flush, brake pads if needed. trans & rear end fluid change. tires.

Husky - jet carb, oil change.

 

I hope that's it......

Link to comment
Share on other sites

so...

 

Le Mans --> Sport conversion

under top triple clamp handlebars

install ohlins to the front (+oil&seal change)

engine&trans&rear oil change

all springs in Gbox replaced

find the bug in el. circuit

make my tacho work again

re-paint the underseat&tank

get 2 sets of Michelin Pilot Power 2CT

and 1 set of Pirelli Supercorsa.

 

nice plan for long winter B)

Link to comment
Share on other sites

Just maintenance and repair:

 

My Rossa Corsa:

 

New timing case gasket

Rear drive box seal

Speedo repair or replacement

 

Helen's V11 Sport

 

Replace steering head bearings

Bleed clutch and brake fluid

 

Cafe Racer

 

Need to complete installation of Motogadget instrument unit- a friend is helping me with this next month

 

Guy :xmas:

Link to comment
Share on other sites

Everything in the manual for a 12k service, paint the bevel box, New cans, though the jury is still out between these from OS pipes and a set of carbon cans from Quill.

motoguzzi_lemans1100.jpg

performance__20silencers.jpg

Quill_exhausts_for_V11..jpg

Link to comment
Share on other sites

Everything in the manual for a 12k service, paint the bevel box, New cans, though the jury is still out between these from OS pipes and a set of carbon cans from Quill.

 

Those reverse megs would be unique. They are a bit narrow and polished for the V11's muscular lines though.

I'm a fan of the carbon cans, but then again I'm biased. ;)

Link to comment
Share on other sites

Those reverse megs would be unique. They are a bit narrow and polished for the V11's muscular lines though.

I'm a fan of the carbon cans, but then again I'm biased. ;)

 

It's the highly polished finish that puts me off if I'm honest. The quills come with an optional set of carbon end caps that will compliment the bike. Here abouts there should be a picture of a Kwacker fitted with the can I'd like to put on the V11.

Quill_with_cap..jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...