sp838 Posted February 26, 2014 Author Share Posted February 26, 2014 Gods willing, the front end swap is happening this Saturday! *knocking on wood, fingers crossed* Removed all the crap off the front end (headlight, gauges, ignition switch, brake lines) and the master cylinder off the handle bars. Got the top clamp off and back on, just for practice, and also because tomorrow I will grind off the tabs for the steering lock as well as all the rust, and will patch paint everything that needs it, provided my paint guy finally mixes me up the color. Docc, the part number for my top triple clamp is 01.49.31.00, as shown in the last pic below. Apparently it's from a Sport 1100IE. Saturday is the big day. I will post a recap of my successes and failures, hopefully more of the former than the latter. Here are some high res pics: Link to comment Share on other sites More sharing options...
sp838 Posted February 27, 2014 Author Share Posted February 27, 2014 meanwhile, my machinist friend and motorcycle Guru has prepped the lower GSXR clamp (removed the GSXR steering stops, drilled and tapped holes to make new steering stops, removed the steering damper mount and all the casting flashings), and made some spacers in case we need them: Link to comment Share on other sites More sharing options...
sp838 Posted February 28, 2014 Author Share Posted February 28, 2014 had the alternator cover painted red, while I was at it... Link to comment Share on other sites More sharing options...
docc Posted February 28, 2014 Share Posted February 28, 2014 had the alternator cover painted red, while I was at it... That'll test the durability of your paint! Link to comment Share on other sites More sharing options...
sp838 Posted February 28, 2014 Author Share Posted February 28, 2014 Link to comment Share on other sites More sharing options...
sp838 Posted March 2, 2014 Author Share Posted March 2, 2014 SUCCESS! Can't post pics, here is an instagram link: http://instagram.com/p/lBGxsiKdbh/ will post more later. Link to comment Share on other sites More sharing options...
czakky Posted March 2, 2014 Share Posted March 2, 2014 Very nice, I'm just a wee bit jealous. Link to comment Share on other sites More sharing options...
sp838 Posted March 2, 2014 Author Share Posted March 2, 2014 Thank you GuzziMoto for all your help! Link to comment Share on other sites More sharing options...
GuzziMoto Posted March 6, 2014 Share Posted March 6, 2014 Looks great. I hope it will work as well for you as it looks. Link to comment Share on other sites More sharing options...
sp838 Posted March 6, 2014 Author Share Posted March 6, 2014 Thanks GuzziMoto. It should work out very well indeed. I followed your advice and put the 3mm shim underneath the bottom bearing and dust seal, it all lines up perfectly. I had Stig replace the internals with Ohlins 30mm NIX road and track cartridges, and new heavier springs. The Tokico 4 pot radial calipers should be a significant upgrade as well. Mounted the front rotors with titanium hardware. I cut off the damper mounting tab. Just need to figure out the steering stops. Lots of little details to sort out, like a longer clutch line. Starting to get a little anxious about the approaching good weather, I might miss a couple weeks early on but it will all be worth it in the end. Link to comment Share on other sites More sharing options...
docc Posted March 6, 2014 Share Posted March 6, 2014 Changing the brake master cylinder? Link to comment Share on other sites More sharing options...
GuzziMoto Posted March 6, 2014 Share Posted March 6, 2014 Sweet, very nice. I wish I could justify the money on the Ohlins cartridges. Maybe next time. I have no doubt they are worth it. I did drop the coin on a Brembo adjustable master from Todd at GuzziTech. Link to comment Share on other sites More sharing options...
sp838 Posted March 6, 2014 Author Share Posted March 6, 2014 docc, I have the Tokico master that goes with the calipers. I looked into the piston diameters, and the brembo one that we have stock is very close. And the pistons in the Tokico calipers are actually a little smaller. So I'm going to try keeping the Brembo master for now, just because it works better with my kill switch and throttle setup. If it doesn't work, I'll use the Tokico master and then figure how to make it play nice with the neighbors. Link to comment Share on other sites More sharing options...
docc Posted April 9, 2014 Share Posted April 9, 2014 sp838, sorry the forum dropped the last couple images from your gallery. Would you mind reposting them? Especially the pic of your upper clamp on the bike - bellissimo! Link to comment Share on other sites More sharing options...
sp838 Posted April 9, 2014 Author Share Posted April 9, 2014 will do. I remember you mentioning a bike in Arizona you thought I should check out, what was that again? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now