sp838 Posted November 25, 2014 Share Posted November 25, 2014 Anyone know where to get OEM electric connectors? I am looking to make some modifications/simplifications to the harness and would like to keep the stock connectors. First thing I am doing is swapping my tank out for a later model one with the internal pump and filter. The new pump has the same connector on it as the solenoid petcock on the old one, which I am seeking to get rid of. The pump itself is simply wired in. I would like to get the correct plastic connector and have the pump wires from the harness connect to the new internal pump in the tank. I could just cannibalize the old connectors but I'd rather not butcher the parts since they are in good working order and might be useful to someone else. Forgive me if this has already been covered, if so please point me to the thread... Thank you, and happy Turkey Day to all! Link to comment Share on other sites More sharing options...
sp838 Posted November 25, 2014 Author Share Posted November 25, 2014 Ok, so I found these guys in the TPS breakout harness thread: http://www.casperselectronics.com/store2/index.php?cPath=67_71_69 Any way to check, other than eyeball-o-metrics, whether one of these will fit? Link to comment Share on other sites More sharing options...
emry Posted November 25, 2014 Share Posted November 25, 2014 www.corsa-technic.com has a very good selection. Link to comment Share on other sites More sharing options...
sp838 Posted November 25, 2014 Author Share Posted November 25, 2014 Nice site, thanks for posting. I'll keep that handy. Link to comment Share on other sites More sharing options...
fotoguzzi Posted November 26, 2014 Share Posted November 26, 2014 so you need the ends that plug into the main wiring harness, not the main harness plugs right? because I have a main wiring loom from an EV that has the same connectors accept the CPU plug.. could you use that? I might have the electric petcock from an EV and you could cut that end off to use, I'd want about 20 bucks for it. I also have some of the plugs from the cam and crank sensors and maybe other stuff too.. Link to comment Share on other sites More sharing options...
slowkitty Posted November 26, 2014 Share Posted November 26, 2014 What you need for the breakout harness is the Delphi Metri-Pack 150 3 way. There are also AMP superseal connectors around as well. Link to comment Share on other sites More sharing options...
sign216 Posted November 28, 2014 Share Posted November 28, 2014 I've had good luck on Ebay, using a deep and through search. To get some Superseal connectors I had to go to Ebay Spain, and also UK (I'm in the USA). The vendors here would only sell them wholesale. Link to comment Share on other sites More sharing options...
slowkitty Posted November 28, 2014 Share Posted November 28, 2014 It seems that this Latvia chap got everything. http://www.ebay.com/itm/6way-AMP-Superseal-1-5-Series-Waterproof-Sealed-Connector-Kit-/251332613784?hash=item3a84975698&vxp=mtr No affiliation. Link to comment Share on other sites More sharing options...
swooshdave Posted May 20, 2017 Share Posted May 20, 2017 So what are the OEM connectors? Or is there a mix of AMP Superseal and Delphi Metri-Pack? Link to comment Share on other sites More sharing options...
docc Posted August 4, 2017 Share Posted August 4, 2017 So what are the OEM connectors? Or is there a mix of AMP Superseal and Delphi Metri-Pack? Okay, so, I know the connectors with the ribbed seals are AMP, but what are the ones with the wire bail, and the others with the fussy push-tabs? Left side of the frame: Right side of the frame: Link to comment Share on other sites More sharing options...
swooshdave Posted August 4, 2017 Share Posted August 4, 2017 Can you catalog with pics the different connectors? Pics of the connector ends helps the most along with a couple shots of the outsides. Does that make sense? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
swooshdave Posted August 4, 2017 Share Posted August 4, 2017 For example this is a knockoff AMP Superseal I'm using to replace the connector on my heated grip because the wire got pinch by the steering stop. I replaced the entire connector as I couldn't match the original connector. Cheaper and faster to do that. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
docc Posted August 4, 2017 Share Posted August 4, 2017 wow, that's some nice documentation! I'm not likely to get that far with the individual connectors. I am going to try and annotate/label those photos with the connectors that need special attention and post them in the Tank Off Maintenance Checklist. I am, basically, forcing myself to perform the Tank-off maintenance before putting the Sport back in service after being down six weeks for the clutch etc. Opened each connector, cleaned with CRC Electronics cleaner, treated with Caig DeOxit Gold and groomed along the frame with *gentle* Zip-tying. Link to comment Share on other sites More sharing options...
docc Posted August 4, 2017 Share Posted August 4, 2017 Oh! And Vaseline®, can't forget the Vaseline®! Link to comment Share on other sites More sharing options...
docc Posted August 5, 2017 Share Posted August 5, 2017 Ok, so, this is the connector for the sidestand switch. This is how your V11 runs when in gear and underway. I moveed this connector back out of the incoming spray and carefully groomed the wire away from trouble (exhaust etc). What kind of connector is this? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now