Jump to content

odometer not working


rossi46

Recommended Posts

Hi noticed that my odometer has quit! speedo still works as does the trip, for now anyway!, I have seen a few threads about fitting a bicycle computer and wondered if anyone has any tips on fitting the magnet to the wheel/rotor? concern is it will just be flung off at speed! also i assume that a wireless model will not work because of interference? I think speedhut or similar in the future but want a backup for my Euro trip for now-thanks 

Link to comment
Share on other sites

I've just made an enquiry about Swift Crono clocks they are UK made and come with a sensor which does away with the cable, my ITI speedo still actually works but they look like cheap crap,   

Link to comment
Share on other sites

Rossi, is your V11 an early white face Veglia, or later black face ITI?

 

(consider adding a year-model to your profile for all to see.  :) )

 

Either way, the internal gear drive has likely played up and can only be repaired by a full disassembly and the correct spare part(s).

Link to comment
Share on other sites

If you're just looking for temporary speedo solution that you're not going to throw away, consider using a hand-held GPS. I have an older Garmin GPS 60-series and a RAM mount on the bars. You can choose what data fields to show on the screen, including MPH, trip meter, time of sunset, etc.

 

Might be nice to have a map on the handlebars for your trip too.

Link to comment
Share on other sites

All interesting stuff this- great info!

I just got back from a Scotland trip, bike ran sweet as a nut all the way round :mg:

As I was a-heading back south, I went the scenic route thru alston and buttertubs etc etc (so, so recommended), I lost the tacho, odometer and speedo all in the space of 10 miles...  Quite novel not knowing how fast you're going!  Heh!

Got the bike home, on the stand, full clean down, new tyres + bearings, everything greased up like a piggy, clox turned out to have various broken wires plus a puddle sitting in there....

'That'll be the problem then', I thought, 'Sod it, I'm off for a clock-less spin on my new tyres anyways'.

Dropping her off the stand the weight falls weird and over she goes. :angry:  Cnut.

The clock housing catches on my workshop stand and smashes it up.  I thinks that'd be irony right there.

 

Soooo, I'm in the market for a new set-up methinks.

 

Stew

Link to comment
Share on other sites

+1 on GPS for instrumentation. Plus it gives you that space for the useless Vagueliar for more important things. :whistle:

IMG_0065.jpg

  • Like 3
Link to comment
Share on other sites

I changed out the whole kit and caboodle. See
http://www.v11lemans.com/forums/index.php?showtopic=17811&hl=cabernet

 

Not quite sure where you are, but I plan to be at the Newcott chippy, by "Lynn Ravens" café on Pree's Heath on Thursday evening sometime between 19:30 and 20:30 on the V11. If you want to come and snoop around a bit, fill your boots.

Link to comment
Share on other sites

I can't see your posted pix on that thread, got a working link at all?
If I get done in time this Thursday, I'll bob over to have a squint at them in person.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...