Tomchri Posted August 15, 2023 Author Share Posted August 15, 2023 Thanks Marty, wild quess now is down to Termignoni . Cheers Tom. 1 Link to comment Share on other sites More sharing options...
Tomchri Posted September 21, 2023 Author Share Posted September 21, 2023 It says dryk ventil, ( pressure valve), wondering what purpose ?And the sensor in the left valve cover? Same temp sensor as in the filter box on the V11.Cheers Tom. Sent fra min SM-S906B via Tapatalk 1 Link to comment Share on other sites More sharing options...
audiomick Posted September 22, 2023 Share Posted September 22, 2023 Hi Tom. I don't know anything for sure, but... In the German forum I found a number of references to the temp. sensor in the valve cover. It seems the Quota and some Californias had that as well, and it seems to be for motor temperature, perhaps one of two temperature sensors. The pressure valve has "100 kPa" written on it. That is "only" one Bar. Where is it exactly? With that value, it can hardly be fuel pressure. As far as I know, that should be more like 3 or 4 Bar, shouldn't it? EDIT: I think I've found the pressure thing. It looks like it is not a valve but rather a pressure sensor. Part #14 here: https://www.stein-dinse.biz/etkataloge/etkataloge.php?l=de&m=227&t=5671&c=W The disturbing news: https://www.stein-dinse.com/de/search.html?grp=&searchStr=29727061 and the good news, the alternative part: https://www.stein-dinse.com/de/search.html?grp=&searchStr=200516001 Slight price difference.... 1 2 Link to comment Share on other sites More sharing options...
MartyNZ Posted September 22, 2023 Share Posted September 22, 2023 10 hours ago, Tomchri said: It says dryk ventil, ( pressure valve), wondering what purpose ? Cheers Tom. Sent fra min SM-S906B via Tapatalk The Sport 1100i manual says "Absolute pressure transducer. This transducer is powered by the electronic control centre and gives information about the absolute pressure in the air filter box. This transducer is connected to the filter box through a small pipe. Its output signal will produce a correction signal as function of the barometrical pressure". On the V11 there is a pressure transducer built into the ECU. 4 1 Link to comment Share on other sites More sharing options...
Tomchri Posted September 22, 2023 Author Share Posted September 22, 2023 Again thank you Marty, sort of my thoughts to. I need to get manuals in ingliissh. Leak down test today, amasingly good for 95000km, 3-4% tested with 2 Sun test maschines. Another exelent friday, IPA time here. Thanks for the V11 forum. Cheers Tom. Sent fra min SM-S906B via Tapatalk 4 Link to comment Share on other sites More sharing options...
Tomchri Posted September 23, 2023 Author Share Posted September 23, 2023 Simple reason for clutch slippage. 7.12mm plates. Cheers Tom. Sent fra min SM-S906B via Tapatalk 3 Link to comment Share on other sites More sharing options...
audiomick Posted September 23, 2023 Share Posted September 23, 2023 1 hour ago, Tomchri said: Simple reason for clutch slippage. 7.12mm plates. That's supposed to be more like 8 mm or so, isn't it? Link to comment Share on other sites More sharing options...
Tomchri Posted September 24, 2023 Author Share Posted September 24, 2023 Correct, new ones 8.4mm. Cheers Tom. 1 Link to comment Share on other sites More sharing options...
audiomick Posted September 24, 2023 Share Posted September 24, 2023 I am always pleased to find a clearly identifiable cause for a problem. Makes it easier to fix, and one knows for sure that the fix really is a fix. Link to comment Share on other sites More sharing options...
Tomchri Posted November 4, 2023 Author Share Posted November 4, 2023 Sounds about right. New clutch in, connect clutch wire, ææh NO clutch. Ended up with a 3,1mm long SS rod inside the metal cylinder that pushes the rod. Yes larger clutch plates, not 100% original. But yes bike in 2gear, small plier in u joint, clutch handle in, YES. Cheers Tom. Sent fra min SM-S906B via Tapatalk 4 Link to comment Share on other sites More sharing options...
audiomick Posted November 5, 2023 Share Posted November 5, 2023 On 11/4/2023 at 2:09 AM, Tomchri said: ... ææh NO clutch. For the sake of clarity: I gather you mean it didn't release because the new clutch is thicker, and the system didn't provide enough reach without the 3-and-a-bit extra from the spacer? Link to comment Share on other sites More sharing options...
Tomchri Posted November 5, 2023 Author Share Posted November 5, 2023 19 hours ago, audiomick said: For the sake of clarity: I gather you mean it didn't release because the new clutch is thicker, and the system didn't provide enough reach without the 3-and-a-bit extra from the spacer? Correct. Cheers Tom. 1 Link to comment Share on other sites More sharing options...
Tomchri Posted April 4 Author Share Posted April 4 Finished, now weather and tuning. ECU been a trip to C Jefferies. We like clean ladies.Cheers Tom. Sent fra min SM-S906B via Tapatalk 7 Link to comment Share on other sites More sharing options...
footgoose Posted April 4 Share Posted April 4 What a beauty Tom 1 Link to comment Share on other sites More sharing options...
Chuck Posted April 5 Share Posted April 5 Attaboy, Tom.. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now