biesel Posted November 29, 2018 Share Posted November 29, 2018 I made a new video about replacing the hinges of the side panniers: 2 Link to comment Share on other sites More sharing options...
biesel Posted December 4, 2018 Share Posted December 4, 2018 New video: Moto Guzzi California Steering Damper: 2 Link to comment Share on other sites More sharing options...
biesel Posted January 26, 2019 Share Posted January 26, 2019 New video: Moto Guzzi California Vintage - Replacing the 2006 Windshield 1 Link to comment Share on other sites More sharing options...
biesel Posted June 4, 2019 Share Posted June 4, 2019 Two new slideshow videos - Internal Fuel Pump Unit & Double Cardan Universal Joint Assembly 2 1 Link to comment Share on other sites More sharing options...
biesel Posted July 15, 2019 Share Posted July 15, 2019 New Slideshow Video - California 1100 Shift/Brake Levers Maintenance 3 Link to comment Share on other sites More sharing options...
biesel Posted July 17, 2019 Share Posted July 17, 2019 New Slideshow Video - Extend the Inner Rear Fender of a Moto Guzzi California Vintage 2 1 Link to comment Share on other sites More sharing options...
footgoose Posted July 17, 2019 Share Posted July 17, 2019 I'm so glad people can make instructional video like these, and are willing to share. Link to comment Share on other sites More sharing options...
biesel Posted July 19, 2019 Share Posted July 19, 2019 Here is the next one ... about two screws 1 Link to comment Share on other sites More sharing options...
biesel Posted November 19, 2019 Share Posted November 19, 2019 Next video: Moto Guzzi California 1100 (e.g. Vintage) – Checking and Adjusting Valve Clearance 3 Link to comment Share on other sites More sharing options...
Tinus89 Posted May 11, 2020 Share Posted May 11, 2020 My dad has one of these, and it runs lean. Lean as in pinging. I've offered to do a service (oil/filters/valves etc). My question is: can I also read out this ECU using Guzzidiag and my V11 cable? Is the ECU also a 15x unit like the V11? Does anyone know the TPS settings? Link to comment Share on other sites More sharing options...
LowRyter Posted May 11, 2020 Share Posted May 11, 2020 Tinus, I would contact Beetle. He will likely have a map for that. You might search here or on Wild Guzzi to contact him. The other possibility might be to get a Power Commander. 1 Link to comment Share on other sites More sharing options...
Tinus89 Posted May 12, 2020 Share Posted May 12, 2020 Anyone else who has some knowledge about the TPS setting and readout using GuzziDiag? I don't live near the bike... Link to comment Share on other sites More sharing options...
Lucky Phil Posted May 12, 2020 Share Posted May 12, 2020 23 hours ago, Tinus89 said: My dad has one of these, and it runs lean. Lean as in pinging. I've offered to do a service (oil/filters/valves etc). My question is: can I also read out this ECU using Guzzidiag and my V11 cable? Is the ECU also a 15x unit like the V11? Does anyone know the TPS settings? First thing to do is change out the fuel filter and measure the fuel pressure if you can before going down the re-flashing the map path. Ciao Link to comment Share on other sites More sharing options...
Tinus89 Posted May 12, 2020 Share Posted May 12, 2020 2 hours ago, Lucky Phil said: First thing to do is change out the fuel filter and measure the fuel pressure if you can before going down the re-flashing the map path. Ciao Intent was to do a full service first, if required (history-based) change the filter as well (it's an in-tank unit, isn't it?), but why are you suggesting to measure fuel pressure? Once the revs are up high enough, she pulls as expected. The pinging is only on >50% throttle at rpm 3000-5000, after that it's gone as well. It needs a full service anyway, as last was 02-2019. Link to comment Share on other sites More sharing options...
docc Posted May 12, 2020 Share Posted May 12, 2020 I would think @biesel would know these tuning parameters such as the TPS setting and if the CO Fuel Trim can be set easily with guzzidiag. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now