80CX100

To the OP, in all seriousness, from my files,7 ft/lbs or 1 Kg/M, be very careful in all the conversions that can take place from manuals/internet to the tool in your hand. Do yourself a favor and don't just use any big old torque wrench, that you happen to have lying around, especially the new modern click styles. I've got 3 old fashioned beam style torque wrenches, 1/2", 3/8" & a tiny 1/4" drive, I would only use the tiny 1/4" drive on those little screws. I used to make the mistake of over tightening those rocker valve cover screws to solve perpetual leaking issues,,, it was the wrong method,,, let the gasket do it's job, don't over tighten and compress it. You can always go back and tighten up a little if need be , but once the OEM threads are stripped they're gone forever, yes they can be repaired, but it's an unnecessary pita. Good luck Kelly

Torque? I used that a couple of times on those little screws, not a good idea ;~) Allen keys used like screw drivers, and then snugged just a little more, that's one spot, I like to err on the side of caution and med lock tite. I think the newer engines might have a harder alloy, the old round heads were made with some type of Italian cottage cheese lol. What made the biggest difference for me was going to the real good Valopini sp? valve cover gaskets, so I wasn't tempted to over tighten them trying to stop leaks. Go gentle and good luck Kelly

Lovely bike, I had a '76 KZ900 in a very similar color,, being young and foolish at the time, I had to trade it in on the new Yamaha XS1100, oh well hindsight. I'm in a similar boat in regards to mechanics, I don't do it because because I love wrenching, I love my bikes and I want somebody that cares about the quality of work and care that goes into them,,, I've yet to find a mechanic that fits the bill. Yes I take a long time to do some jobs, I spend more time researching than wrenching, but at least I'm confident that it's done well at the end of the day. Tks for sharing, that's a sweet old bike. Kelly

As much as I'd love to race a bike, there are a bunch of valid reasons I don't; but I have spent a fair amount of time around the track volunteering with the VRRA, so take my opinion with a grain of salt and that in mind. Find out what bikes/classes racing clubs are active in your area, it's no use setting up a full size modern race bike, if most of the races locally are smaller or vintage classes. For myself, as much as I'd love to have one of my big guzzis out on the track, I know that much weight and power would get me in trouble, I'd much rather throw around a light weight single or as someone already mentioned Ninja EX500 (great race track rep). It can be more fun to ride a slower bike fast. Dependable, tough and easily repairable/cheap would be my prime considerations, race bikes go down, it's a fact of life, not the type of thing I'd like to do to one of my guzzis or a real nice Ducati. If you're intending to do real racing and not just track days, it usually makes much more sense to buy a race bike that is already built and prepped, imo. Whatever you decide, don't skimp on protective gear. If any of the clubs hold racing schools, the riders seem to get a lot out of them, it not only improves their skills and confidence, but they are so much more comfortable and seem to have more fun out on the track, fwiw. Good luck with it, I envy you, they all look like they are having a blast out there! Kelly

I just tripped across the original post on WG where Mike Haven of MPH had listed some of the Guzzi OEM paint codes. I snagged it in a format this time, that could be re posted here so there would be a record of it in case it may help anyone, fyi Good luck Kelly Paint codes are a national secret. You wont be getting any calls back. I secured this list a few years ago after much badgering. its incomplete, but all there isCOLOR CODES:NORGE 1200 BLACK - BASF GE22-9659 RED - 5.4D.23441 AKZO NOBEL <<pic29436.jpg>> <<pic21654.jpg>> GRAY - (Embedded image moved to file: pic29436.jpg)1200 SPORT BLACK - 5.4M.22705 AKZO NOBEL RED - 5.4D.23441 AKZO NOBELBREVA 1100 BLACK - 5.4M.22705 AKZO NOBEL GRAY - 928XV374 PALINAL RED - 5.4D.23441 AKZO NOBEL ORANGE - DS.08046 LECHLER WHITE - BIANCO DIAMANTE: SCHOCH: 610.PM02 ASCO-BASECOAT PERLATOBIANCOBREVA 850 2007 GRIGIO EXCALIBUR (Grey excalibur) : SCHOCH 675 ALP11-1/3675-003560GRISO 1100 BLACK - 5.4M.22705 AKZO NOBEL RED - 5.4D.23441 AKZO NOBEL LGHT BLUE - DS02096 LECHLER YELLOW - DS02138 LECHLER ORANGE - ARANCIO SATINATO :SCHOCH 3610-010805 PALINAL 923MAT3NEVADA I.E. GRAY - GRIGIO LUCE - DS02074 LECHLER (+ 928XV051 PALINI for fuel tankstripe) BLACK - NERO GUZZI - 5,4M.22705 AKZO NOBEL (+ 928XH913 PALINI forfuel tank stripe) RED - ROSSO DEL LARIO - 66051 LECHLER (+ 5.4M.22705 AKZO NOBEL forfuel tank stripe) RED 06 - ROSSO LDS08040 LECHLER BLACK 06 - NERO GUZZI 929R486 PALINAL or 54M22705 AKZO NOBEL YELLOW 06 - GIALLO 08048 LECHLER WITHE-BLUE 06 - BIANCO MICA DS08042 LECHLER - BLUE MIDNIGHT: DS08039LECHLERBREVA 750 BLACK - NERO OLLARE - 928 XH 913 PALINI or 57E80806 AKZO NOBEL GRAY - GRIGIO PIOMBO: AKZO 57E 85804 or PALINI 928 XH 644 + TRASP.LUCIDO 923 HS 90 ROSSO BREVA (2001) - Palini 928 XH 900 + TRASP. LUCIDO 923 HS 90 RED RACE- ROSSO GUZZI - 5.4D-23441 AKZO NOBEL BLACK 06/07 - NERO GUZZI - 54M22705 AKZO NOBEL LIGHT BLUE 06 - AZZURRO- DS02096 LECHLER WHITE 06 - BINACO MICA - DS08042 LECHLERCALIFORNIA 06 RED - ROSSO - LECHLER LDS08040 BLACK - NERO PALINAL 929R486 or ARDESIA AKZO NOBEL 54 M 22.710 WHITE/GRAY - BIANCO LECHLER LDS08040 / GRIGIO LECHLER LDS08043 VINTAGE - NERO PALINAL 929R486 or ARDESIA AKZO NOBEL 54 M 22.710CALIFORNIA 07 RED - ROSSO - LECHLER LECHLER LS 66013 NERO PALINAL 929R486 O ARDESIA AKZO NOBEL 54 M 22.710(Embedded image moved to file: pic21654.jpg)

As the winter sets in and I prepare to address a few outstanding jobs on my list, get parts together for my bikes, etc, I'm also mindful of paying some of my debts. When I downloaded guzzidiag a long time ago, I wasn't sure I would ever be able to get it to work or have a need for it, so I didn't hit the donate button at the time, promising to go back at a later date. I finally used it on my Griso this summer, and once I got it fully hooked up with the proper drivers, it worked like a charm. I look forward to tuning my new to me V11Lemans with it later this winter. I recently corresponded with Beard, the "generous genius", behind guzzidiag, he's now working on ways to improve the stock guzzi ABS systems; the man obviously is very dedicated to helping us guzzi owners. Even though I couldn't seem to navigate my way back to the donation button, it was very simple to send a donation via Paypal (to a friend) to guzzidiag@gmail.com , I had to be careful when I converted to Euros, rather than my intended 100 Euros donation, I almost sent .01 Euros, apparently it's an easy mistake to make. Merry Christmas and a Happy New year to everyone, ride safe and often Kelly

I think the large number of spirit flushes taking place and being reported, aren't always due to improperly adding gear oil through the timing inspection hole. I think it's usually due to leaking push rod seals or as in my case, the previous owner of my CalVin, adding too much gear oil to the transmission. I think the thought process is,,, if the manual calls for 750ml and a full bottle is 1 litre,,, adding the whole 1 litre jug of gear oil would be more of a good thing, what could it hurt ? The flush saved me from a huge job on my, new to me CalVin, and the clutch has been working great since, going on 3 years. Kelly

Hey Mark, Welcome aboard, It's not my gig and I don't want to speak out of turn, but I think if you follow SCUD's PayPal instructions a few posts back, you should be in like Flint. Kelly

Hey Scud, I just sent a pay pal for 2 springs. I was hoping to add enough extra so you could have a good beer or Starbucks while you were packing my springs; but by the time the international fees and the exchange rate kicked my Canadian dollars around, you'd be lucky to get a stale coffee at the 7-11, ;~) lol js. Thank you so much for taking this on again, and very obviously doing a hell of a fine job Very much appreciated Kelly

I'm relatively new at this FI tuneup, only done my Griso(very different), CalVin (very similar?), but I'll throw a couple of thoughts your way. It sounds like you had a variety of symptoms, replaced a variety of parts and it still doesn't want to run, are you sure it's not something completely unrelated ie plugged fuel filter, line, fuel pump etc or an electrical connection short or bad relay, side stand, neutral ignition switch etc. I thought the 150 mv TPS reading was for the baseline setting with everything disconnected and the throttle plates closed, then once reconnected TPS adjusted to 486/487? mv for idle, I remember adjusting the idle, TB balancing and going back and forth adjusting the TPS a few times to get it running sweet. I don't understand your comment about the bike being able to run with the TPS disconnected, I would have assumed that if the TPS was disconnected nothing would run. Fresh eyes in the morning may solve it for you, sometimes works for me,lol. Good luck Kelly

I agree with Rox Lemans, might be worth taking the pieces into a decent paint shop to see if they can salvage the original paint and refinish with some type of clear coat, if it worked, best and cheapest solution?. I have heard of decent paint suppliers making up custom, quality spray bombs, but I don't think anything like that is going to come cheap either, and from experience, painting is a learned art. I not only hoard motorcycles but info as well,lol. I snagged this enclosed document that Mike from MPH had posted somewhere with valid paint codes for some of the modern guzzis, I don't see any V11s on the list, but I did notice a few greys that MG has used in the past, might be worthwhile comparing against yours for a possible match with greys on other models. Ps, due size limitations I can't post the doc, if you want it, pm me an email add, and I can get it to you. While searching for Mike's original post I found a few posts that may help you out, I copied the link over for one that seems to have a lot of links and info, fwiw. Good luck Kelly

Hey Chuck, I know time is precious, it's going to be a long winter, plenty of time for things to fall into place, if it's meant to be. Hopefully Scud is able to get the spring shop to run another batch off & if he's sick of boxing and mailing, perhaps there is someone close to him that may consider taking that over. I could forward some cash for beer & pizza, if someone wanted to throw an improved spring boxing/mailing party,lol. I can appreciate that all the little details required for something like this to float are a pita. If reengineered spring part 2 takes place, great, if not; I'll make sure I have a couple on hand from MGCycle by springtime. Thanks for your expertise and time that you've already invested in this; this 42 page thread is a testament to you,Scud & others that make this guzzi world, a special one. Kelly

Higher mileage, but sounds like it's well loved and set up, in the UK as well, fwiw

I put the word out on WG, done. https://wildguzzi.com/forum/index.php?topic=103615.0 Tks for rallying the cause. Kelly

Well to be fair, I remember my first guzzi and as I was getting familiar with it, I looked at the plug for the timing hole and figured that was where the tranny oil must go. Luckily I did rtfm, and I got the oil in the right place, but I thought at the time, I'm sure that others have made the same mistaken assumption, there's probably been a few out there, they're just being shy,lol. I've done the Varsol flush before on my CalVin for a slipping clutch problem, worked like a charm, my best ever mcgyver fix. I'll file docc's tip about removing the starter for next time, that sounds like a good plan. To the OP from experience, when you're whittling your wooden plug, don't use hardwood, I couldn't get it to seal well,,, the wood that worked was a piece of real cheap softwood, so the fibres swelled as it absorbed the solvent and sealed the hole. After I did two good rinses working the clutch, I took the bike out and abused the hell out of the clutch (fanning it many times)to get it good and hot and burn off any residue. Good luck Kelly

Hey Tom, When I tried to jam my order through, it defaulted to their standard international shipping $40-50, I wasn't willing to pay that, so I left the shipping section blank and jammed my order through anyways and mentioned in the comments to ship it cheapest, USPS if possible. Their customer service contacted me and it went smoothly $15-20? shipping. Caspers were a treat to deal with, I've been trying for a frustrating month to deal with Nelson Riggs for a simple set of replacement straps that were missing from the bags when I got my V11. I can't believe that in this modern world, a line on a map can bring all business and common sense to a complete stand still,lol. Good luck with it Kelly

Hey Tom, I enclosed a pdf copy of the Casper's product description of the breakout cables that I had saved for my own records. Hopefully this goes through and you can read it ok. Fyi good luck Kelly Breakout cable Caspers V11Lemans forum 109172 TPS Breakout (Dense 3 way Metripack).pdf

So true. Low power, light weight bikes can be a hoot to throw around. The price of poor judgement or technique usually isn't as costly as on their big brothers. Back in the early 80's when I was a young beat cop, senior police management came up with the misguided notion that it would be a good idea to create a more mobile beat squad and equipped us with a fleet of silver Honda CB200s. They were the epitomy of an unmanly/non macho motorcycle, but we never had so much fun on bikes in all our lives. There were legendary crashes into the Rideau Canal, jumps off the Carlington Ski Hill, we even ran our own Moto GP on the bike paths & parkways in the middle of the night when no one was around, many smiles generated by the lowly CB200 Kelly

Hey Tom, I don't know how long you've been seeing the shut down for maintenance notice on their site, or how long they will be down; but I just ordered the break out cable from them a couple of weeks ago and they were excellent to deal with, even shipping up here to Canada. fwiw If they have a customer service contact info, I'd contact them directly, ultimately that's what I ended up doing and it helped my order out a lot. Good luck Kelly

Wow, nice simple tip. Not only going down but a little back as well, I can see that being worthwhile. I keep reading about the Buell pegs being a good fit,,, are they all the same or are there pegs from specific model Buells to watch for? Tks Kelly

I haven't gone down that road yet, I regret not going tubeless on the bikes right from the get go. I know you love the Contis, are you running classic attacks or similar on that bike?

Chuck, That is a gorgeous bike, it just looks ready to gobble up miles in comfort. I don't know if it's the angle or the camera lens but I don't think I've ever seen a tonti with such a beefy looking front tire. I know I've got one of those apart on the bench for quite a while now, but I don't remember it looking that nice when it was still in one piece,lol. Kelly

Meinolf, I'm the member that Doc was referring to. I live in Canada, my currency is Canadian dollars, I would like to ensure that as much of my donation gets to Beard as possible, and not get chewed up in currency conversions. If I go straight to PayPal with Beard's address guzzidiag@gmail.com, does Beard prefer donations in Euros? or US funds? Tks very much Kelly

Hey Chuck, I've ripped through the site, even manually entered https://www.von-der-salierburg.de/home in the address bar, I'm not seeing it. I recall seeing it when I first did the download. I wasn't confident in my ability to download and get the program running, made a mental note to myself that if I got it downloaded and running, I'd return and donate. It took me a few months, but now when I go back, I can't seem to find it? Tks Kelly

I like many others guzzi owners in the world am extremely grateful for the knowledge,work and expertise that has gone into guzzidiag in support of the guzzi global community. I would like to be able to make a donation in appreciation of that kindness, but I've ripped through the site on the a/m links, and I haven't been able to locate a paypal button. Would you have a link that could take take me straight to a paypal button on that page. Tks very much Kelly