LowRyter

Did you get Chuck's "Rosie"?

When I was looking to purchase my Greenie, there was one for sale on the MGNOC classified that was displayed inside a house in the great room next to the grand piano. I don't imagine that it was ridden too often. I do believe that spine frame Guzzis look like works of art. The one I purchase 2 1/2 years ago had 14k miles on it. I have 30k on it now.

http://wildguzzi.com/forum/index.php?topic=69168.0

wow

I think the pink gives it a nice patina.

I was wrong... 0.10mm (0.004″)Exhaust: 0.15mm (0.006″) is correct valve adjustment set. At least it's what I use on both my Guzzis and what the book seyz. I am still not certain if you have an ignition problem of fuel delivery problem. The fuel pump should cycle every time you turn the key on. And if it's not running, it's pretty easy to pull a sparkplug lead and determine if it's sparking. The first step is to know whether it's spark or fuel.

No, I didn't mean your plugs were fouling, I meant it's not clear whether you have an ignition problem vs fuel delivery. I keep an extra plug so I can pull off a lead and stick the plug in. I can see whether it sparks or not. Much quicker vs unscrewing the sparkplug. I would still check the ground.

When it quit did you check for spark? I carried an extra plug around with me when my EV would die (BTW- it wasn't the spark, it was the fuel pump. Specifically it was the corroded fuses- I think.) If you think it might be ignition/electrical related, you might reinforce the ground. You might also check that the fuses aren't corroded. Either of those could cause an issue with ignition and the tach. If you have spark, then listen for the fuel pump. And what Docc said too. Valves are a might tight but I wouldn't think would be the cause.

All I know is the cylinders are straight under the tank on my EV and one side (left IIRC) is largely covered up on the Sport from the rider's seats. No, I don't worry about it.

Duhhh. I feel stupid now. That is part of it. Thanks for the clue, I needed one! Engine is also off the center line , 13mm to the drive side ->right. -KG- AFAIK the V11 with the 6 speed gearbox has the engine in the middle. The older models with the 5 speed box are off with 13 mm. Sent from a clever thingy with a microprocessor and an interweb connection my goodness. now that does give me food for thought. thanks

Which way does yours tilt? I have to fix this, now that I have noticed, it will drive me nuts. The asymmetry is in the engine, not the tank. The RH cylinder is forward of the LH cylinder. This is because the connecting rods cannot meet at exactly the same spot on the crankshaft. Therefore the RH rocker cover is more forward and is more exposed than the LH. No fixing this... just enjoy it. That being said, you could still have issues with hose or wire routing. The emissions hoses can be relocated to a box of spare parts (or replaced with simple vacuum lines). I've been having a hard time getting my airbox to sit correctly because of all the hoses and wires that run underneath. This could possibly tilt your tank. uhmm. just like my EV?

when I sit on the bike, my tank seems to cover one cylinder totally but not the other.

I know that Super Twin (from another Guzzzi forum) had his air stream parked there. I enjoyed taking photos on the crossover bridge.

But does he drive Maserati? I would very much doubt it. I think he was an art director. I told him I had two Guzzis and I like the "feel" and the "ride".

Yeah I saw MM jump over the wall and take off on his back up. His qualifying run appeared on the screen to be nearly a controlled wreck all the way around the track. When I got home, I was disappointed that my DVR cut out at the end of quals because the NASCAR race ran late and they didn't show any of it on the Moto GP broadcast.

That grade school kid on Cafe Racer TV show that built that Honda 175 with a Dustbin fairing was there. I need to post some more photos other than the race. The Wall of Death saw running there too. Another interesting tidbit, the Guzzi rep at the show from the home office in New York City doesn't ride motorcycles. I didn't stay late after a morning ride on Mike's Ducati Monster, a day at the track, and dinner at Black's BBQ at Lockhart- I hit the wall. The Guzzi display at the track had the new Cal Eldorado and Cal Audice there.

This is Mike Taylor's old bike, Rat Guzzi bought it and put in a clutch and did some honey-dos to it.

http://www.dpreview.com/galleries/7320746049/albums/cota-2015 here some photos from Moto GP

wow. Don't those bars have solid metal stock in them ?

113hp Griso sounds pretty cool. I'd be happy with 95 on my Sport.

This a Race Tech emulator kit- not for cartridge forks such as on the V11 Sports/LeMans, You need to look for a Race Tech Gold Valve kit and Springs. It made a big difference on my Suzuki Bandit but it doesn't handle as well as my Sport.

Thanks Scud, I'll pull the seat and battery and have a look. I'll tighten up some. When my buddy sat on it I was surprised with the squat on the rear. Funny, when I sit on it it seems to sit pretty square and firm and doesn't seem to sag much compared to my other bike. It handles great, good turn in and confidence in the turns. My mechanic said it looked pretty close. But seeing my buddy sit on it, caused me to do a double take. And I would like it not weave when I am hauling luggage on the highway. Anyway, I play with the damper and try to add some preload to the shock.

Since I am riding 500 miles to Austin this week, I was wearing in the new Roadsmarts and playing around with the dampener. I could feel a slight difference with the steering effort, it was set midway and tried it on both ends (full ease and full tension). I think I'll go full tension when I put the bags on and get on the interstate. Now after I got back home a buddy sat on the bike. I was surprised that it squatted more than I expected. I am guessing it's PIA to get to the preload? The side panels come off to get to the adjuster? And on the bottom of the shock I can easily find the clicker. I didn't have time to experiment with it, I assume clockwise is stiffer?

hey JB, I'd like to know a little more about the Raceco valves and set up. I had a Race Tek kit installed on my Bandit and it was real help. Of course my Sport is a much better handler than the Bandit.

Still thinking about it. going to let it simmer until after MotoGP weekend. Too much work to get done. I was thinking you'd get it before Moto GP so could surprise me.