dowieze Posted June 1, 2022 Share Posted June 1, 2022 12 hours ago, docc said: Be certain the external shift assembly is properly adjusted and the lever does not strike anything (like the Frame Side Plate). There is another spring (of three) that re-centers the lever. It could need attention, as well. Perhaps, it was installed backward. See Image 7 in the first post of the link below . . . @Lucky Phil produced this fabulous tutorial: Phil thanks for the advice. I do a check up. Link to comment Share on other sites More sharing options...
Steve S Posted July 14, 2022 Share Posted July 14, 2022 Hey Scud I’ve had a few springs from you for bikes here in the uk and I’m in need of another one if you can oblige Steve Link to comment Share on other sites More sharing options...
4corsa Posted July 14, 2022 Share Posted July 14, 2022 If I may ask, since you've had a few, have any of them failed? Link to comment Share on other sites More sharing options...
Steve S Posted July 14, 2022 Share Posted July 14, 2022 No failures so far 1 Link to comment Share on other sites More sharing options...
docc Posted July 14, 2022 Share Posted July 14, 2022 2 hours ago, Steve S said: Hey Scud I’ve had a few springs from you for bikes here in the uk and I’m in need of another one if you can oblige Steve May be best to either pm (Message) scud or use the "@Scud" embed to trigger a notification . . . Link to comment Share on other sites More sharing options...
Scud Posted July 14, 2022 Author Share Posted July 14, 2022 14 minutes ago, docc said: May be best to either pm (Message) scud or use the "@Scud" embed to trigger a notification . . . In a rare occurrence... I actually saw this before you, Docc. Steve and I are using PMs now. And in response to 4Corsa's question - I have not yet heard of a single failure of the new spring. Also - Steve is willing to forward additional springs within the UK. So if anyone else in UK wants one, let me know via PM in the next few days. 1 Link to comment Share on other sites More sharing options...
4corsa Posted July 14, 2022 Share Posted July 14, 2022 That's great to hear! I installed a Scud spring over 2 years and 5k miles ago and no problems. Link to comment Share on other sites More sharing options...
docc Posted July 14, 2022 Share Posted July 14, 2022 1 hour ago, 4corsa said: That's great to hear! I installed a Scud spring over 2 years and 5k miles ago and no problems. Two years, 10,000 miles here. And I shift A LOT ! 1 Link to comment Share on other sites More sharing options...
4corsa Posted July 14, 2022 Share Posted July 14, 2022 What a great thing Scud has done for us - thank you Scud! 1 Link to comment Share on other sites More sharing options...
Scud Posted July 14, 2022 Author Share Posted July 14, 2022 7 hours ago, 4corsa said: What a great thing Scud has done for us - thank you Scud! Thanks, but this would not have been possible without Chuck and all the other input on this incredibly long topic. These Chuck-engineered springs give us all the confidence to take longer rides without fear of losing the ability to shift far from home. 4 Link to comment Share on other sites More sharing options...
4corsa Posted July 14, 2022 Share Posted July 14, 2022 1 minute ago, Scud said: Thanks, but this would not have been possible without Chuck and all the other input on this incredibly long topic. These Chuck-engineered springs give us all the confidence to taking longer rides without fear of losing the ability to shift far from home. ...and thank you so much Chuck! 2 Link to comment Share on other sites More sharing options...
Chuck Posted July 14, 2022 Share Posted July 14, 2022 It was just pay back to the community for all it does for V11S. 3 2 Link to comment Share on other sites More sharing options...
roktbox Posted August 2, 2022 Share Posted August 2, 2022 @ScudRequesting a Super Spring for my Scura. Scouring the topics and posts for other necessities before attempting to correct the issue. Issue: Shifter drops below 1st and won't come back up through neutral. Shifts through 3rd are fine, but falls out of 5th to 4th. Can't grab any gear other than 4th (?) at this point. 1 Link to comment Share on other sites More sharing options...
gstallons Posted August 3, 2022 Share Posted August 3, 2022 Make sure the shifter / pivot bolt have not rusted together . TRUST ME on that one . 2 1 Link to comment Share on other sites More sharing options...
Scud Posted August 3, 2022 Author Share Posted August 3, 2022 11 hours ago, roktbox said: @ScudRequesting a Super Spring for my Scura. I just send a PM. But I agree with gstallons that it sounds like a linkage problem. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now