Jump to content

Tomchri

Members
  • Posts

    976
  • Joined

  • Last visited

  • Days Won

    28

Everything posted by Tomchri

  1. After you have cleaned trottlebody's and AFC screws, I woud take OF the trottle linkage, and check TPS,,, like 3 times more, 157mv,, It's V imortant... so I've learned. Then I use a feeler gauge 0.05mm behind each trottle stop screws, and then each screws around a quartof a turn.. Adjust the trottle linkage with the white knob so it fits perfect on the trottle body. She can easily have misfires on one side if this is not correct. My Greenie did. This doesn't cost anything,, ah well a few beer's. IPA is of big help. Plugwires 5000ohm. Basicly every elec connnection needs TLC. It does feel V good when she is behaving again, Yu'l find it, cheers tom.
  2. Haven't seen much of 2 plugs conversion on the V11 ?? my 992 tonti does like the bigger bang on each side of the piston dome. I allways did a little spending when upgrading ignition systems on the old big blocks, and allways Pete Jackson gear drives. I just like it,,,, not a big performance gain for the money, but better. Cheers tom.
  3. Wild quess, a busted hose,, Look 👀 see what's in the plumbing division? Redneck rep. Cheers tom.
  4. All cleared tjenare, hm hm # 283 on the forum. Exchange rate are horrible at the moment. Used to be 8 -8.5kr for a $, now 10.50kr a $, Thanks for the reply. Cheers tom.
  5. V11,, didn't see any ad on the blocket.se ? Any leads will be apreciated. Cheers tom.
  6. You are so right Docc,, was even inked in 78 with 426 Hemi. 9 years ago the misses, Rose, was 50,, so exspensive flowers with wheels,, well deserved , hanging in since early seventy's Side comment,,, every time I'm entering the garage, I never stir my eyes towards the sort of new 1250 HP GS,,, just towards V 11 and tonti's... at least a good illness. Wishing enjoyable riding for everybody. Cheers tom
  7. Luigi, this 2001are missing the 2 welded bracket's on the spine, to support the gear box. Not worried at all. Cheers Tom Sent fra min SM-A505FN via Tapatalk
  8. Got license plates yesterday, new Pirelly Angel GT and new front bearings on the Greenie. PO di'nt like corner's, plenty of meat left on the Dunlops, but flat like a , di'nt handle good, compared to my R Corsa with Øhlins and Pirelly GT's. Checked the frame, straitgh to my abillity, wondering about suspension , new GT's today = NICE. Will do a new sync after a trip in the mountains, first tuning Meinolf 's way, 2-3000rpm in town traffic speeds, not perfect, rest of the curve = YES. I know I mentioned it before, my Greenie felt like a bomb compared to my R Corsa , but felt more even today ??? More reports later. What a serious relationship. Still V early in the season up here, theyr'e , not going anywhere. Next week 6c and rain Yes I have another IPA. Cheers Tom Sent fra min SM-A505FN via Tapatalk
  9. Not much of a Christmas guy, but coud'nt help it. Weather picking up,, and will get license plates thursday. Had them both tuned today Meinolf 's way. Curious yes. Will report. IPA time. Cheers Tom Sent fra min SM-A505FN via Tapatalk
  10. Yes please, bubb bbuu just thats in my dream picture, no busted bolts and nuts,,,,, WHY isn't the money up here worth anything.at the moment. . One thing is for sure, Television is like Fred flintstones. Wish everybody good health. ( CHILLY yet, but made 600m on the old Le Mans ) Final IPA cheers tom.
  11. And the Sport 1100 hangers, pricey but available . Cheers tom.
  12. tlm In Holland still have new ones, 175€. A lathe and some teflon will do the job to. Cheers tom.
  13. And would that be possible to hear ( the quieting ramp ) with some help,, like a big screwdriver, not the doctor gear ? Cheers tom
  14. Someone suquested to leave the ground out from the harness, to avoid what happen to your bike. So I did a separat ground from the ECU to an extra ground terminal. Shoud be some pictures of it in the latest battery discusson Cheers tom.
  15. Yes it should be grounded , a separate ground is good. Sorry can't say why, but K Roy will soon. Cheers tom.
  16. And another variant, when I installed led bulbs, fronts were flashing, a bit fast, but no go at the rear. Switching wires on the left rear, AND working. Waited for some adjustable led relays. , all good. As usual I don't know. Cheers tom.
  17. Docc, the + and - terminals are extremely sturdy. Had a bush fix before recieving the + protection. ( pictures ) The only place with heat is in my head,,, sometimes. From regulator now, 1 wire to + terminal, and 1 wire to minus terminal. The wire you see is for an outlet, never in use, a little miscoloration, not been hot. Very happy with the charging. About 70 more days, tuning outside. Cheers Tom. Sent fra min SM-A505FN via Tapatalk
  18. Just another solid nest [emoji482]. Cheers Tom. Sent fra min SM-A505FN via Tapatalk
  19. Looks sorted looking at the Omron's, shake stoppers ? some soft material . More curious, those 2 white squares with adjusters or ? Cheers tom.
  20. YES, and a rattle can with some red magic penetrating stoff, or have it nuked. Cheers tom.
  21. Like Marty said, or I bought a pump from Quantum fuel systems, same price, and working well. Time for another Chang beer. cheers tom.
  22. Ok, interesting, meaning I can't wait to find out what Meinolf's mapping will do. Actually they both fired easily, not idling perfect, but I know I have to do the sync when the weather permitting to do it outside . More later. Time for another Chang beer. Cheers tom.
×
×
  • Create New...